Lidl Ardee Co Louth | bauprotec Render System | available from SMET

Job: Lidl Ardee, Co Louth, Ireland
Smet Supported Partner: IFP Ltd for GEDA  Construction – Principle Contractor
SMET Products Used:

bauprotec 850 M – Lightweight Lime Cement Render

 bauprotec RHS – Multi-Purpose Render

bauprotec SLP – Tanking & Plinth Render

bauprotec FLP Plus – Ultra Lightweight Fibre Render

Related Downloads

Description

GEDA  Construction – the principal contractor completed the new Lidl store in Ardee, Co Louth, Ireland.

IFP Ltd Plastering Contractor machine applied the LIDL External Render System externally using bauprotec FLP Plus lightweight render onto Poroton S8 blocks. As Key Coat onto mass concrete and insulated plinths, bauprotec RHS Multi-Purpose Render was used with the addition of bauprotec SLP for plinths.

Internally bauprotec 850M was used as part of the LIDL Internal Render System onto Poroton T10 blocks and bauprotec FLP Plus onto Poroton S8 blocks.

This LIDL render spec, available from SMET consists of the following:

bauprotec 850 M  – Lightweight Lime Cement Render is a factory-produced Lightweight Lime Cement Render, specially designed for machine or hand application produced to EN 998-1: 2010 and is CE Marked.

bauprotec RHS Multi-Purpose Render is a CE Marked, factory-produced highly polymer-modified render specially designed for hand and machine application produced to EN 998-1: 2010.

Mineral Finish Coat – K is a CE-marked, factory-produced, mineral-based, high-quality finish-coat render, specially designed for hand and machine application to EN 998-1, 2010.

bauprotec SLP – Tanking & Plinth Render is a CE Marked, factory-produced Lightweight Sand & Cement Render specially designed for hand and machine application produced to EN 998-1: 2010.

bauprotec FLP Plus – Ultra Lightweight Fibre Render is a factory-produced highly efficient lightweight mineral lime cement render produced to EN 998-1, specially designed for high insulating masonry for interior and exterior use with excellent working properties.

The special render properties; lightweight, low thermal conductivity, high yield, and Smet Supported Partner superior technical backup, are key factors in choosing SMET.

  • For Poroton Clay Blocks
  • For Lightweight Blocks
  • High Product Yield
  • Excellent Breathability
  • Technical Support
  • Specification Support
  • UK and IRL Nationwide delivery

SMET is committed to delivering consistently superior quality, German-made Render Systems to Lidl Plastering and rendering/plastering contractors across the UK and ROI.  If you’d like to speak to us about your Lidl job, or need help with your specification – contact SMET

All LIDL spec SMET Render System products are available directly from Smet Building Products Ltd, which ensures the contractor has a superior level of technical backup in the machine application of the LIDL specification.

bauprocalc 830 Lime Based Render | Restoration by Keith McKeever Plastering

Job: Refurb External Render
Plastering Contractor: Keith McKeever
Products: bauprocalc 830 – Hydraulic Lime-Based Render/Plaster

Related Downloads

Description

bauprocalc 830 – Hydraulic Lime-Based Render/Plaster was selected for the external rendering in renovating this lovely old house. Check out the lovely curves on the corners by master crafts-man, plasterer Keith McKeever.

bauprocalc 830 is a CE-marked, factory-produced hydraulic hardening render/plaster based on lime, specially designed for hand and machine application produced to DIN EN 998-1.

bauprocalc is an excellent alternative to plaster and renders containing gypsum or patent cement which have less vapour permeable qualities.

Quadruple-BSI-certified SMET Building Products continues to champion sustainability and ethical responsibility in the construction industry, making it a trusted partner for conscientious builders and developers. For more restoration case studies, visit: www.smetbuildingproducts.com/projects

mark-of-trust-multi-scheme-9001-14001-45001-BES6001-black-logo-En-GB-0223

WHY USE LIME-BASED RENDER AND PLASTER?

SMET’s bauprocalc products are CE-marked, factory-produced hydraulic hardening skim coat plasters and render based on lime, specially designed for hand and machine application produced to DIN EN 998-1. bauprocalc KG and bauprocalc 830 contribute to a healthy internal atmosphere.

They are an excellent alternative to plaster and renders containing gypsum or patent cement which are too strong and have less vapour permeable qualities.

bauprocalc 830 has unique properties, making it suitable for application on low, medium, and high-density substrates, especially suited for renovating old /listed buildings and ecological new builds.

Good vapour permeability performance allows an unhindered transference of excess internal moisture through the building to the outside, thereby contributing significantly to a balanced and healthy internal atmosphere.

SMET is delighted to have supplied its bauprocalc render for this lovely home.

Check out SMET’s full range of lime and lime-based products now available direct from Smet Building Products Ltd.

SMET is BES 6001 Compliant

SMET is BES 6001 Compliant

Call SMET to purchase bauprocalc directly: Tel UK: +44 (0) 28 3026 6833 or ROI: +353 (0) 1697 8586

Or to purchase SMET NHL binders online, you can buy SMET NHL 3.5 direct from Haldane Fisher Nationwide, follow this link. SMET NHL binders, available online or in-store via our distribution partner Haldane Fisher. 

Make SMET your trusted partner! ☺

 

Seamus Heaney Centre | bauprocalc Lime Based Plaster | Queen’s University Belfast

Job: Transformation of Seamus Heaney Centre, QUB
Main Contractor:

Plastering Contractor:

GEDA Construction

IFP Ltd

Products: bauprocalc KG – Hydraulic Lime-Based Skim Coat

bauprocalc 830 – Hydraulic Lime-Based Render/Plaster

SMET NHL 3.5

Related Downloads

Description

bauprocalc KG – Hydraulic Lime-Based Skim Coat, bauprocalc 830 – Hydraulic Lime-Based Render/Plaster and SMET NHL 3.5 were selected for the internal plastering in the renovation of this important historic building refurbishment of The Seamus Heaney Centre in QUB Belfast.

This consisted of the Scud Coat: SMET NHL 3.5,  followed by the Base Coat: bauprocalc 830, and finished with our Finish Skim: bauprocalc KG.

Quadruple-BSI-certified SMET Building Products continues to champion sustainability and ethical responsibility in the construction industry, making it a trusted partner for conscientious builders and developers. For more restoration case studies, visit: www.smetbuildingproducts.com/projects

mark-of-trust-multi-scheme-9001-14001-45001-BES6001-black-logo-En-GB-0223

NI Builder Magazine says,As the main contractor for Queen’s University Belfast’s new £4.9m Seamus Heaney Centre, GEDA preserved the heritage of two listed buildings while upgrading the site to meet modern standards. Transforming two Grade II-listed buildings into Queen’s new £4.9m Seamus Heaney Centre has proved both a challenging and rewarding experience for its main contractor.

Dungannon-based GEDA Construction is well-versed in handling projects of all sizes and complexity and pushing the boundaries of engineering and construction.

The refurbished site occupies 38-40 University Road and 3 Mount Charles buildings. Spanning 1,000 sqm, it doubles the size of the original centre founded in 2004 and opened by the acclaimed poet himself.

Having successfully navigated the many challenges emerging along the way, the Seamus Heaney Centre now represents a distinguished addition to GEDA’s portfolio.

“A significant milestone for our company, it reflects our ability to handle complex, high-profile projects and reinforces our reputation as a trusted and capable construction partner,” said Eddie Murnin, Associate Director of Construction at GEDA

“This project stands out as a testament to our expertise, collaborative spirit and unwavering commitment to preserving cultural heritage while advancing modern construction practices.”  Source NI Builder July 24

Seamus Heaney Centre_bauprocalc lime based plasters & SMET NHL 3.5

Geda Construction and IFP | internal Plastering | Bauprocalc Lime-based plaster SMET

WHY USE LIME-BASED RENDER AND PLASTER?

SMET’s bauprocalc products are CE-marked, factory-produced hydraulic hardening skim coat plasters and render based on lime, specially designed for hand and machine application produced to DIN EN 998-1. bauprocalc KG and bauprocalc 830 contribute to a healthy internal atmosphere.

They are an excellent alternative to plaster and renders containing gypsum or patent cement which are too strong and have less vapour permeable qualities.

They are ideal for kitchens, bathrooms, and rooms where high humidity levels are expected. bauprocalc KG produces a mortar that is softer than cement mortar. After the initial set, stability and strength gradually build up over time, allowing enough flexibility to cope with minor settlement or movement in the building during this period, thereby reducing the risk of cracking.

bauprocalc 830 has unique properties, making it suitable for application on low, medium, and high-density substrates, especially suited for renovating old /listed buildings and ecological new builds.

Good vapour permeability performance allows an unhindered transference of excess internal moisture through the building to the outside, thereby contributing significantly to a balanced and healthy internal atmosphere.

SMET is delighted to have supplied its bauprocalc plaster and SMET NHL 3.5 for the lime plastering of The Seamus Heaney Centre, Queen’s University Belfast.

 

Check out SMET’s full range of lime and lime-based products now available direct from Smet Building Products Ltd.

SMET is BES 6001 Compliant

SMET is BES 6001 Compliant

Call SMET to purchase directly: Tel UK: +44 (0) 28 3026 6833 or ROI: +353 (0) 1697 8586

Or to purchase SMET NHL binders online, you can buy SMET NHL 3.5 direct from Haldane Fisher Nationwide, follow this link. SMET NHL binders, available online or in-store via our distribution partner Haldane Fisher. 

SMET NHL binders are particularly suited for ecological new builds, conservation, restoration, and preservation works. The products’ special composition allows mortars to breathe and permits constant hygrometric exchange between the substrate and the environment.

Make SMET your trusted partner! ☺

 

The Sidings Grand Canal Dock | Final Pour | Rapidur EB5 for Rapid Drying Screed

B Doherty Mobile Screed Factory_at the Boston Sidings Final Pour_EB5 Rapid Drying Floor Screed

Job: Boston Sidings Grand Canal Dock Final Pour
Smet Supported Partners:
Main Contractor:
B Doherty Screeding Service

Collen Construction

Product: Rapidur® EB5 Rapid Drying Floor Screed

Description

We supplied our Rapidur® EB5 additive to Smet Supported Partner, B Doherty Screeding Mobile Screed Factory. On behalf of Collen Construction, using their Mobile Screed Factory, with the help of Laser-Guided, Screed Robot, they supplied polymer-modified Rapidur® EB5 Rapid Drying Sand / Cement screed with fibres at 75mm.  This ensured a fast turnaround with UFH being commissioned 3 days later at the Grand Canal Dock Boston Sidings. Have a look at these wonderful pictures.

• Factory Produced On-Site
• Rapid Drying and Fibre Reinforced
• Allowing early use of screed
• Allowing early floor covering installations
• Bonded, Unbonded, and Floating Floor Screed Constructions
• Suitable For Underlayment In Wet Areas
• BS 8204-1 ISCR Categories A, B, and C

 SMET assists in delivering another innovative, showcase flooring solution to their Smet Supported Partners.

bauprotec 850 M External Render | Kells Co Meath | Remark Plastering Ltd

 Job: 650m2 Render on new-build houses 
Smet Supported Partner: Remark Plastering Ltd
SMET Products Used

CASEA Bauprotec 850 M – Lime Cement Render

Related Downloads

TDS CASEA Bauprotec 850 M – Lightweight Lime Cement Render

EPD – CASEA Bauprotec 850M

 

Description

CASEA Bauprotec 850 M – Lightweight Lime Cement Render was selected for the external render of these new homes by Smet Supported Partner, Remark Plastering Ltd. They machine-applied the Lightweight CE marked Lime Cement Render using their state-of-the-art spray rendering/plastering machine.

Bauprotec 850 M is manufactured from a controlled blend of selected aggregates, lightweight aggregates, cement, polymers, fibres, and other components to give a high-quality weather-resistant rendering product that is suitable for use in external rendering and internal plastering. Bauprotec 850 M is a factory-produced Lightweight Lime Cement Render specially designed for machine or hand application produced to EN 998-1: 2010. Bauprotec 850 M is incredibly versatile and very user-friendly.  It’s suitable for use in all suitable spray rendering machines (e.g. G 4, G 5, m3, S 48, MP25, SP11) and can be transported on all pneumatic conveyor systems.

The product’s special composition allows the product to breathe and also permits constant hygrometric exchange between the substrate and the environment.  The special render properties; lightweight, low thermal conductivity, high yield, and Smet Supported Partner superior technical backup, are the key factors in choosing SMET Render spec products.

SMET is committed to delivering consistently superior quality, German-made Render Systems to Plastering and Rendering Contractors across the UK and ROI.

650m2 bauprotec 850 M | New Build | Machine Applied Render | Remark Plastering Ltd

 rJob: 650m2 Render on new-build house 
Smet Supported Partner: Remark Plastering Ltd
SMET Products Used

CASEA Bauprotec 850 M – Lime Cement Render

Related Downloads

TDS CASEA Bauprotec 850 M – Lightweight Lime Cement Render

EPD – CASEA Bauprotec 850M

 

Description

CASEA Bauprotec 850 M – Lightweight Lime Cement Render was selected for the external render of newly built home by Smet Supported Partner, Remark Plastering Ltd. They machine-applied the Lightweight CE marked Lime Cement Render using their state-of-the-art spray rendering/plastering machine.

Bauprotec 850 M is manufactured from a controlled blend of selected aggregates, lightweight aggregates, cement, polymers, fibres, and other components to give a high-quality weather-resistant rendering product that is suitable for use in external rendering and internal plastering. Bauprotec 850 M is a factory-produced Lightweight Lime Cement Render specially designed for machine or hand application produced to EN 998-1: 2010. Bauprotec 850 M is incredibly versatile and very user-friendly.  It’s suitable for use in all suitable spray rendering machines (e.g. G 4, G 5, m3, S 48, MP25, SP11) and can be transported on all pneumatic conveyor systems.

The product’s special composition allows the product to breathe and also permits constant hygrometric exchange between the substrate and the environment.  The special render properties; lightweight, low thermal conductivity, high yield, and Smet Supported Partner superior technical backup, are the key factors in choosing SMET Render spec products.

SMET is committed to delivering consistently superior quality, German-made Render Systems to Plastering and Rendering Contractors across the UK and ROI.

DCU Polaris Building | B Doherty EB5 Rapid Drying Screed & 200 baseTherm® Void Former

 

Job: DCU Polaris Building | School of Health & Human Performance | Dublin
Smet Supported Partners:
Main Contractor:
B Doherty Screeding Services & baseTherm®

Walls & McKeown Joint Venture

Product: Rapidur® EB5 Rapid Drying Floor Screed

baseTherm® 200

Related Downloads

TDS Rapidur® EB5 Rapid Drying Floor Screed

baseTherm® Floor Insulation Brochure

SMET Floor Screeds and Compounds Product Selector

Description

We supplied our Rapidur® EB5 additive to B Doherty Screeding Services, who, using its Mobile Screed Factory and Laser guided Screed Robot, supplied, on behalf of the main contractor, Walls & McKeown; 3,500 m² Rapidur® EB5 Floor Screed placed over 80mm of void former supplied by baseTherm® Liquid Floor Insulation. The unique Fast Track Screed is a pneumatically pumpable, high-quality, rapid drying, levelling floor screed material based on sand, cement, and Sopro Rapidur® EB5 screed accelerator.   This screed is unique in that it allows early use of floor and early final floor covering installations. Click the link to see a showcase of jobs recently completed by expert screeder, Brendan Doherty Screeding Services.

baseTherm® is an NSAI Agrément certified BEPS liquid floor insulation, complete with its own EPD. It’s produced and installed on-site by our local team using a Mobile Floor Insulation Factory – without mess, waste, or fuss.  Check out the gallery of baseTherm® images.

• Factory Produced On-Site
• Rapid Drying and Fibre Reinforced
• Allowing early use of screed
• Allowing early floor covering installations
• Bonded, Unbonded, and Floating Floor Screed Constructions
• Suitable For Underlayment In Wet Areas
• BS 8204-1 ISCR Categories A, B, and C

 KEY BENEFITS: baseTherm®

SMET assists in delivering another innovative, showcase flooring solution to their Smet Supported Partners.

bauprotec 850 M | Machine Applied Render | Remark Plastering Ltd | New build terrace

Remark Plastering Ltd _bauprotec 850M facade render _SMET

Job: Render on new build terrace houses – Dec 23
Smet Supported Partner: Remark Plastering Ltd
SMET Products Used

CASEA Bauprotec 850 M – Lime Cement Render

Related Downloads

TDS CASEA Bauprotec 850 M – Lightweight Lime Cement Render

EPD – CASEA Bauprotec 850M

 

Description

CASEA Bauprotec 850 M – Lightweight Lime Cement Render was selected for the external render of these newly built terrace homes by Smet Supported Partner, Remark Plastering Ltd. They machine-applied the Lightweight CE marked Lime Cement Render using their state-of-the-art spray rendering/plastering machine.

Bauprotec 850 M is manufactured from a controlled blend of selected aggregates, lightweight aggregates, cement, polymers, fibres, and other components to give a high-quality weather-resistant rendering product that is suitable for use in external rendering and internal plastering. Bauprotec 850 M is a factory-produced Lightweight Lime Cement Render specially designed for machine or hand application produced to EN 998-1: 2010. Bauprotec 850 M is incredibly versatile and very user-friendly.  It’s suitable for use in all suitable spray rendering machines (e.g. G 4, G 5, m3, S 48, MP25, SP11) and can be transported on all pneumatic conveyor systems.

The product’s special composition allows the product to breathe and also permits constant hygrometric exchange between the substrate and the environment.  The special render properties; lightweight, low thermal conductivity, high yield, and Smet Supported Partner superior technical backup, are the key factors in choosing SMET Render spec products.

SMET is committed to delivering consistently superior quality, German-made Render Systems to Plastering and Rendering Contractors across the UK and ROI.

bauprotec 850 M | Machine Applied Render | Remark Plastering Ltd | Refurb

Job: Render Refurb
Smet Supported Partner: Remark Plastering Ltd
SMET Products Used

CASEA Bauprotec 850 M – Lime Cement Render

Related Downloads

TDS CASEA Bauprotec 850 M – Lightweight Lime Cement Render

EPD – CASEA Bauprotec 850M

 

Description

CASEA Bauprotec 850 M – Lightweight Lime Cement Render was selected for the external render of this retrofit by Smet Supported Partner, Remark Plastering Ltd. They machine-applied the Lightweight CE marked Lime Cement Render using their state-of-the-art spray rendering/plastering machine.

Bauprotec 850 M is manufactured from a controlled blend of selected aggregates, lightweight aggregates, cement, polymers, fibres, and other components to give a high-quality weather-resistant rendering product that is suitable for use in external rendering and internal plastering. Bauprotec 850 M is a factory-produced Lightweight Lime Cement Render specially designed for machine or hand application produced to EN 998-1: 2010. Bauprotec 850 M is incredibly versatile and very user-friendly.  It’s suitable for use in all suitable spray rendering machines (e.g. G 4, G 5, m3, S 48, MP25, SP11) and can be transported on all pneumatic conveyor systems.

The product’s special composition allows the product to breathe and also permits constant hygrometric exchange between the substrate and the environment.  The special render properties; lightweight, low thermal conductivity, high yield, and Smet Supported Partner superior technical backup, are the key factors in choosing SMET Render spec products.

SMET is committed to delivering consistently superior quality, German-made Render Systems to Plastering and Rendering Contractors across the UK and ROI.

bauprotec 850 M | Machine Applied Render | Remark Plastering Ltd | Private House

Job: Private New Build
Smet Supported Partner: Remark Plastering Ltd
SMET Products Used

CASEA Bauprotec 850 M – Lime Cement Render

Related Downloads

TDS CASEA Bauprotec 850 M – Lightweight Lime Cement Render

EPD – CASEA Bauprotec 850M

 

Description

CASEA Bauprotec 850 M – Lightweight Lime Cement Render was selected for the external render of this fabulous new house by Smet Supported Partner, Remark Plastering Ltd. They machine-applied the Lightweight CE marked Lime Cement Render using their state-of-the-art spray rendering/plastering machine.

Bauprotec 850 M is manufactured from a controlled blend of selected aggregates, lightweight aggregates, cement, polymers, fibres, and other components to give a high-quality weather-resistant rendering product that is suitable for use in external rendering and internal plastering. Bauprotec 850 M is a factory-produced Lightweight Lime Cement Render specially designed for machine or hand application produced to EN 998-1: 2010. Bauprotec 850 M is incredibly versatile and very user-friendly.  It’s suitable for use in all suitable spray rendering machines (e.g. G 4, G 5, m3, S 48, MP25, SP11) and can be transported on all pneumatic conveyor systems.

The product’s special composition allows the product to breathe and also permits constant hygrometric exchange between the substrate and the environment.  The special render properties; lightweight, low thermal conductivity, high yield, and Smet Supported Partner superior technical backup, are the key factors in choosing SMET Render spec products.

SMET is committed to delivering consistently superior quality, German-made Render Systems to Plastering and Rendering Contractors across the UK and ROI.