Sopro GD 749 – Universal Floor and Wall Primer
Light-blue, solvent-free, fast-drying, synthetic resin primer for high or variable suction substrates. For pretreatment of cement screeds, calcium sulphate-based screeds, board subfloors, gypsum plasterboard & gypsum fibreboard, lime/cement render, and gypsum plasterwork.
Benefits of Sopro GD 749 Universal Floor and Wall Primer
- For walls and floors, indoors and outdoors
- Ready to receive covering: after approx. 10 minutes at 23 °C
- Suitable for use in conjunction with wall and floor heating
- GISCODE (German hazardous substances classification): D1
- DGNB (German Sustainable Building Council): Top quality level 4, Line 8
- Recommended by Sentinel Haus Institut
TDS Sopro GD 749 Universal Floor and Wall Primer
TDS SMET_Tiling Onto Calcium Sulphate Floor Screed_System I
TDS SMET_Tiling Onto Calcium Sulphate Floor Screed_System II
SMET How To – Tanking/Waterproofing System Flyer
Smet Professional Tiling Systems Brochure
SMET Floor Screeds and Compounds Product Selector
EPD_Sopro GD 749 Universal Floor and Wall Primer
Sopro GD 749 Universal Floor and Wall Primer was used in Center Parcs Longford, Ireland
Field Of Application
Sopro GD 749 primer reduces absorbency and evens out variable suction in substrates. It stabilises friable surfaces and binds loose particles. Sopro GD 749 improves adhesion. Sopro GD 749 prevents bubbling where overcoated by surface fillers and waterproof membranes; premature water loss is prevented where thin-bed tile adhesives and waterproof membranes are subsequently applied.
Absorbent substrates such as cement render, lime/cement render, gypsum plaster, renders made from masonry cement, masonry, concrete, aerated concrete, paperless gypsum panels, gypsum plasterboard and gypsum fibreboard, cement screeds, calcium sulphate screeds, magnesium oxychloride (magnesite) screeds.
100 – 200 g/m² depending on substrate absorption.
Lambswool roller, foam roller, brush, block brush. Once dried, the primer is difficult to remove, thus care should be taken to clean tools quickly before the primer dries. Wash tools with water immediately after use.
Packaging: 25kg, 10kg, or 5kg canisters and 1kg bottle.
*) Based on DGNB (German Sustainable Building Council) criterion “ENV1.2 Local Environmental Impact” (version 2015).