Sopro DF 10® Flexible Designer Tile Grout
Fine, flexible, rapid-set, cementitious tile grout, meeting CG2 WA requirements to DIN EN 13888. For grouting all types of ceramic and natural stone coverings to produce a brilliantly coloured, lime-film-free finish. Enhanced protection for joints against mould formation and microorganisms plus lime-film-free finish ensure joint pattern with lasting colour brilliance for both indoor and outdoor applications. Inherent water-beading effect and Hydrodur® technology create water- and dirt-repellent joints. Can be used to grout thin-tile coverings. Also suitable for use in conjunction with wall and floor heating.
Sopro DF 10® Flexible Designer Tile Grout is suitable for damp and wet spaces, living areas exposed to dirt/soiling, food areas and in conjunction with floor heating. Though Sopro DF 10® is suitable for use in swimming pools, the following custom-formulated tile grouts are recommended for such applications: SoproDur® HF 8 / SoproDur® HF 30 high-strength tile grouts, Sopro FEP epoxy tile grout, Sopro FEP 604 three-component epoxy tile grout or Sopro Topas® DFE designer epoxy tile grout. Sopro DF 10® Flexible Designer Tile Grout is suitable for grouting all types of ceramic, natural stone, cast stone, glass mosaic and agglomerate tile coverings, with 1-10 mm joint widths, to produce brilliantly coloured finish on indoor and outdoor walls and floors. Also suitable for grouting thin tile coverings (≤ 4 mm). Optional enhancement of visual appeal through the addition of Sopro gold and silver glitter.
Coverage: 0.3 kg/m² for 30×60 cm tiles, 10 mm joint depth and approx. 4 mm joint width; approx. 0.15 kg/m² for 60×60 cm tiles, 10 mm joint depth and approx. 3 mm joint width
Related Downloads
TDS Sopro DF 10 Flexible Designer Tile Grout
EPD_Sopro DF10® Flexible Designer Grout
SMET – Tiling Onto Calcium Sulphate Floor Screed – System I
SMET – Tiling Onto Calcium Sulphate Floor Screed – System II
Smet Professional Tiling Systems Brochure
Featured Benefits of Sopro DF 10® Flexible Designer Tile Grout
- For walls and floors, indoors and outdoors
- For all types of ceramic, natural stone, glass mosaic and agglomerate tiles Joint width: 1 – 10 mm
- Uniformly brilliant colouring and lime-film-free thanks to OPZ® (Portland cement-free) technology
- Easy-care due to water and dirt repellency
- Enhanced resistance, even to acidic cleaners (for domestic applications) Greater protection for joints against mould formation and microorganisms Walkable after only 2 hours, loadable after approx. 12 hours
- Smooth, easy workability
- 24-month shelf life
- Low-chromate to Regulation (EC) No 1907/2006, Annex XVII
- High crystalline water binding capacity
- Approved as individual product for shipbuilding applications
- Low-chromate to Regulation (EC) No 1907/2006, Annex XVII
- DGNB (German Sustainable Building Council): Top quality level 4, Line 8, based on DGNB (German Sustainable Building Council) criterion “ENV1.2 Local Environmental Impact” (2015 version)
- Recommended by Sentinel Haus Institut
Technical Details for Sopro DF 10® Flexible Designer Tile Grout
| Colour | See table below |
| Use | For grouting all types of ceramic, natural stone and cast stone coverings, thin tile coverings, glass mosaic and agglomerate tile coverings, with 1 – 10 mm joint widths, to produce a brilliantly coloured finish on indoor and outdoor walls and floors. For use in conjunction with floor heating, and in damp and wet spaces. Optional enhancement through the addition of Sopro gold and silver glitter |
| Maturing Time | 3 – 5 minutes |
| Pot Life/Working Life | 30 – 40 minutes; stiffened mortar shall not be retempered by addition of water or fresh mortar to restore workability |
| Walkable | After approx. 2 hours |
| Specified times | Apply for normal temperature range of +23 °C and 50 % relative humidity; higher temperatures shorten and lower temperatures lengthen these times |
| Application Temperature | Between +5 °C and max. +25 °C |
| Joint Width | 1 – 10 mm |
| Coverage | Approx. 1.9 kg/m² for 11.5 × 24 cm tiles and approx. 10 mm joint width;0.7 – 1.0 kg/m² for 30 × 30 cm or 40 × 40 cm tiles and approx. 10 mm joint width |
| Tools | Mixing attachment, stainless-steel trowel, rubber squeegee, grout float, sponge float, roller set for cleaning; clean tools with water while the material is still fresh |
| Packaging | 10 kg bucket; 5 kg bucket 6 no. in box)Glitter: 100 g bag (10 no. in a box) |
Standard Colours – See datasheet.
Available in: 10 kg bucket; 5 kg bucket 6 no. in box) Glitter: 100 g bag (10 no. in a box) SMET also supply a range of High-Strength grouts.
