Sopro LZ 987 – Lightweight Mineral Aggregate
PART OF THE SOPRO SMART® FLOOR SYSTEM
Coverage: Approx. 10 l/ m²/cm (1.6 kg / m²/cm); approx. 1,000 l/ m³ (160 kg / m³)
Sopro LZ 987 – Lightweight Mineral Aggregate
A lightweight mineral aggregate made from expanded glass granulates for use in conjunction with Sopro Rapidur® B5 rapid-set screed binder to produce highly thermally insulating, early over coatable, lightweight levelling layers. Suitable for all coat thicknesses upwards of 20 mm in bonded construction. As an alternative to board subfloor systems. This is for filling pipe penetrations, large voids, and sanitary service runs/assemblies. Ideal for refurbishment/renovation contracts. It is also suitable for use as loose fill. A component in Sopro SMART® system in conjunction with Sopro PG-X 1188 ar mour scrim eXtra and Sopro VS 582 self-level ling filler.
ALSO PART OF THE SOPRO SMART® FLOOR RENOVATION SYSTEM
Can be used as part of the SOPRO SMART® FLOOR RENOVATION SYSTEM in conjunction with Sopro Rapidur® B5 rapid-set screed binder to produce compression-resistant, rapid-set and early tile-laying, lightweight levelling layers with thermal and sound insulation properties. It’s also particularly suitable for levelling out large irregularities, filling pipe penetrations, service shafts, large voids, and sanitary pipes and services. As a base for conventional screeds on a separating layer or insulation.
For producing pressure-stable, fast-setting, lightweight levelling layers that can be worked over early with sound and heat insulating properties in conjunction with Sopro Rapidur® B3, Sopro Rapidur® B5 or SoproTherm® SE-Z. For levelling large unevennesses, filling pipe penetrations, installation shafts, large cavities and sanitary blocks. As a substructure for conventional screeds on a separating layer or insulation. Can be installed on a slope and can also be used as loose fill.
For bonded construction, the substrate should be strong, dimensionally stable, and free from adhesion-impairing substances (e.g. dust, oil, wax, release agent, efflorescence, laitance, paint, lacquer and varnish residue, old flooring adhesive residue). For unbonded construction, the substrate should be strong. As a rule, the installation of a perimeter insulation strip is required to avoid sound transmission paths and for the subsequent laying of tiles or floor finishes.
Related Downloads
TDS Sopro LZ 987 SMART® – Lightweight Mineral Aggregate
SMART® Flooring Renovation System BROCHURE
SMET Floor Screeds and Compounds Product Selector
Benefits of Sopro LZ 987 – Lightweight Mineral Aggregate
- For floors, indoors
- Offering thermal and sound insulation
- Mineral-based
- Aggregate size: 4 – 6 mm
- High compressive strength
- For low area loads
- For refurbishment/renovation contracts
- As alternative to board subfloor systems
- Fire rating to DIN 4102: A1 (non-combustible)
- Moisture-resistant and permanently dimensionally stable
- Component in Sopro SMART® system
- For levelling between pipes
- Overcoatable: after approx. 12 hours (with Sopro Rapidur® B5 or Sopro SE-Z 1580) Low dry apparent density of approx. 0.33 kg/ltr (with Sopro Rapidur® B5) Pumpable
Technical Details for Sopro LZ 987 – Lightweight Mineral Aggregate
| Mixing ratio | 25 kg (1 bag) Sopro RapidurR B3 or Sopro RapidurR B5 : 36 kg
or 220 ltr (4 bags) Sopro LZ 987; approx. 13 – 15 ltr water 12.5 kg (1/2 bag) Sopro RapidurR B3 or Sopro RapidurR B5 : 18 kg or 110 ltr (2 bags) Sopro LZ 987; approx. 6.5 – 7.5 ltr water |
| Working life | Approx. 40 – 60 minutes (in conjunction with Rapidur B3)
Approx. 2 – 3 hours (in conjunction with Rapidur B5) |
| Overcoatable/loadable | After approx. 4 hours with Sopro Rapidur B3; after approx. 12 hours with Sopro Rapidur B5. |
| Coat thicknesses | ≥ 20 mm for bonded construction; ≥ 35 mm on separating or on insulation layer; ≥ 20 mm pipe cover. |
| Compressive strength | Approx. 1 N/mm2 |
| Thermal conductivity | 0.075 W/m2 K |
| Impact sound reduction | Up to 10 dB* |
| Aggregate size | 4 – 6 mm |
| Coverage | Sopro LZ 987: approx. 1.6 kg/m2 or approx. 10 ltr/m2 per cm coat thickness Sopro RapidurR B3 or Sopro Rapidur B5: approx. 1.2 kg/m2 per cm coat thickness |
| Dry apparent density | Approx. 320 kg/m3 (with Sopro RapidurR B3 or Sopro RapidurR B5) |
| Fire rating | A1 to DIN 4102 |
| Tile format | No size limit (min. tile thickness > 6 mm) |
| Max. bay size | 100 m2 |
| Live loads to EN 1991 | A1, A3 and A3; max. area load 2.0 kN/m2, max. point load 1.0 kN/m2 (in conjunction with Sopro VS 582 self-levelling filler > 10 mm coat thickness) |
| Application temperature | Bonded: From +5°C to +25°C (substrate, air, material) Unbonded: All temperatures |
* Test stand value to DIN EN ISO 140-8 serving as a general guide. The performance of trial installations and measurements is therefore recommended, in each case, to establish the actual impact sound reduction index achievable on site.
Available in 9 kg bag (approx. 55 ltr)
Similar Related Projects
Floor Screeds & Compounds from Smet Building Products Ltd have been used throughout Europe for over 30 years. Our comprehensive portfolio includes Calcium Sulphate Based Screed Binders, Self Smoothing Calcium Sulphate Based Screeds & Compounds, Cement-Based Screed Binders and Self Smoothing Cement Based Screeds, Lightweight (Flowing or Dry) Screeds & Compounds for Domestic, Commercial, Industrial and Design use. The SMET range has a Floor Screed solution for any building requirement. Follow the link for further details on the SMART® Flooring Renovation System BROCHURE.