Sopro VS 582 – Self Levelling Filler | Easily Lays to Falls | Floor Refurbishment | Quick to Dry and Early Tiling
VS 582 Leveller | filler | leveller | lays to falls
A flexible, self-levelling, mouldable, rapid-set, cementitious, fibre-reinforced surface filler, with 2-in-1 formulation for simultaneous levelling and creation of falls. Excellent workability and mouldability through the flexible addition of water.
Benefits of Sopro VS 582
- 3 – 70 mm coat thickness 2)
- For floors, indoors and outdoors 3)
- 2-in-1 formulation: suitable as self-levelling filler and for laying to falls
- Compressive strength after 28 days: approx. 35 N/mm² (as levelling coat laid to falls)
- Flexural tensile strength after 28 days: approx. 7 N/mm² (as levelling coat laid to falls)
- Self-levelling
- Outstanding mouldability when laid to falls
- Quick-drying
- Flexible, fibre-reinforced
- Pumpable
- Suitable for timber flooring
- Suitable for floor heating systems
- Long working life: 30 – 40 minutes
- Walkable after 2 – 3 hours
For use as either self-levelling surface filler or filler coat laid to falls through adjustment of consistency. For the production of unbroken surfaces suitable for receiving any flooring type, e.g. ceramic coverings, natural stone finishes, textile, elastic and parquet flooring. Also suitable for smooth application of levelling coats to falls of up to 4% in damp and wet spaces, on balconies and patios etc. Ideally prepared, a blowhole-free substrate for subsequent application of waterproof membranes. For indoor and outdoor use.
Strength class for Sopro VS 582 – Leveller | Filler | Easily Laid to Falls | Refurbishment
As levelling coat laid to falls: CT-C35-F7. Lower strength values, i.e. approx. CT-C25-F5, are achieved for application as self-levelling filler due to higher mixing water requirements.
Related Downloads for Sopro VS 582 – Leveller | Filler | Easily Laid to Falls | Refurbishment
TDS Sopro VS 582 – Fibre-Reinforced Self-Leveller_Lays to Falls
Sopro VS 582_ Leveller and easily laid to falls_Brochure_March 22
EPD_Sopro VS 582_Self Levelling Compound Lays to Falls_22.05.22
SMART® Flooring Renovation System
SMET Professional Tiling Systems Brochure
SMET Floor Screeds and Compounds Product Selector
Ready for floor covering for Sopro VS 582 – Leveller | Filler | Easily Laid to Falls | Refurbishment
Ready to receive ceramics and cast stone after 2 – 3 hours; natural stone after 24 hours. For elastic, textile, laminate, parquet and woodblock floor coverings, maximum permissible moisture content (≤ 1.8% CM) shall be confirmed by CM measurement over full screed crosssection prior to flooring installation. Empirical values for achievement of this – in the function of filler coat thickness, subject to application to dry substrate – are as follows:
Consistency for laying to falls:
3 – 5 mm coat thickness: after approx. 1 day
5 – 10 mm coat thickness: after approx. 3 days
10 – 25 mm coat thickness: after approx. 7 days
25 – 40 mm coat thickness: after approx. 14 days
Self-levelling consistency:
3 – 5 mm coat thickness: after approx. 1 day
5 – 10 mm coat thickness: after approx. 3 days
10 – 25 mm coat thickness: after approx. 9 days
25 – 40 mm coat thickness: after approx. 21 days
Available in 25 kg bags, 42 per pallet.
Also part of the Sopro SMART® – Lightweight Flooring Renovation System
Also part of the Sopro SMART® System. In its core, is the new Sopro LZ 987 SMART® lightweight aggregate, a non-combustible, mineral material made from expanded glass granulate. Sopro LZ 987 is mixed with Sopro Rapidur® B5 rapid-set screed binder to produce moisture-resistant, thermally and sound-insulating, lightweight levelling layers with low area loads and lasting dimensional stability.
SMART Lightweight Thermal Acoustic Floor Renovation System_SMET.ie
This is overcoated with a min. 10 mm thick self-levelling filler layer comprising Sopro VS 582, reinforced by Sopro PG-X 1188 armour scrim eXtra Mesh, that serves to spread loads and create a true, level surface. Thanks to its rapid installation, the Sopro SMART® system offers an interesting alternative to conventional board subfloor solutions. Its true, level finish makes it ideal for the subsequent installation of large-format ceramic units.
Sopro PG-X 1188 – Armour scrim eXtra Mesh_SMART System_SMET.ie
SMET is renowned for its comprehensive range of professional CE marked, EPD certified products. The SMET flooring range includes; calcium sulphate-based screed binders, self-smoothing calcium sulphate-based screeds & compounds, cement-based screed binders, self-smoothing cement-based screeds, lightweight flowing screeds, professional tiling materials & tools, tanking and wet-room solutions, barrier coats, primers & bonding agents; for any domestic, commercial, industrial or design-flooring use.
Suffice to say, the SMET product portfolio includes a German-made floor solution for any new or repair flooring requirement. Get in touch for your upcoming floor screed or tiling project.
Related Projects
1) See TKB (German Technical Committee for Construction Adhesives) data sheet 14 “Rapid-hardening cementitious screeds and cementitious screeds with screed admixtures” issued on 11 August 2015 by Industrieverband Klebstoffe e.V. (German Adhesives Industry Association).
2) Up to 70 mm in bonded construction.
3) In outdoor areas, filler-coated surfaces shall be waterproofed with a suitable membrane (e.g. Sopro TDS 823, Sopro DSF 423/523, Sopro AEB plus 639). Outdoors, Sopro VS 582 is only suitable for the production of finished surfaces when used in conjunction with SoproDur® HF-L 513 high-strength epoxy protective coat and silica sand (for adequate slip resistance).