Sopro TFb 554 – High Strength Tile Grout
High-strength, rapid-set, trass-bearing, cementitious tile grout, meeting CG2 WA requirements to DIN EN 13 888, for 3 – 30 mm joint widths. Low-chromate to Regulation (EC) No 1907/2006, Annex XVII.
For grouting stoneware, fully vitrified stoneware, natural and cast stone coverings. Not suitable for absorbent ceramics (earthenware). Particularly suitable for joints subject to high mechanical loads in workshops, washing facilities, catering kitchens, and other industrial or
commercial spaces, in swimming pools as well as on balconies and patios. Also suitable for use in conjunction with floor heating.
Featured Benefits of Sopro TFb 554 – High Strength Tile Grout
■ Exceedingly high mechanical strength and abrasion resistance
■ Meets minimum requirements in terms of abrasion resistance (≤ 250 mm³) and compressive strength (≥ 45 N/mm²) for reaction resin mortars
■ Ideal for catering kitchens, workshops, washing facilities, and other industrial or commercial spaces
■ Dense microstructure thanks to Mikrodur® technology
■ High resistance to freeze-thaw cycles and high-pressure/steam jet cleaning
■ Good adhesion to joint faces
■ Compressive strength ≥ 60 N/mm² after dry storage and ≥ 75 N/mm² after freeze-thaw cycling
■ Approved for shipbuilding as system component
■ For walls and floors, indoors and outdoors
■ With official test certificates
■ DGNB (German Sustainable Building Council): Top quality level 4, Line 8 *)
■ EMICODE system of GEV (German Association for Control of Emissions in Products for Flooring Installation): EC1PLUS R (“very-low-emission-plus”) rating
Sopro TFb 554 – High Strength Tile Grout was used in Center Parcs Longford, Ireland
Technical Details for Sopro TFb 554 – High Strength Tile Grout
|Mixing Ratio (water only)||3.75 – 4.25 ltr water: 25 kg Sopro TFb|
|Maturing time||3 – 5 minutes|
|Working life||25 – 35 minutes; stiffened mortar must not be retempered by addition of water or fresh mortar to restore workability|
|Walkable||Walkable After approx. 1.5 hours|
|Loadable||Fully loadable after approx. 6 hours|
|Application temperature||Between +5 °C and max. +25 °C|
|Joint width||3 – 30 mm|
|Coverage||Approx. 2.5 kg/m² for 11.5 × 24 cm tiles and approx. 10 mm joint width|
|Shelf life||Approx. 12 months, subject to storage on a pallet in dry conditions in original unopened containers|
Available in: 25 kg bags.
SMET has a wide range of Professional Tiling systems, including, Sopro DF 10® Flexible Designer Tile Grout, Sopro FL 526 Flexible Tile Grout, primers, multi-purpose primers, sealers, tanking, and levelling compounds available for your tiling needs. Did you know we also stock a range of SMET coloured floor options?
For your Tanking/Waterproofing & Tiling jobs, regardless if it’s for a domestic bathroom, block of apartments, or a grand swimming pool, contact your local SMET team for guidance on laying only superior-quality products to the latest standards.