20,000m2 Rapidur® B5 Binder | B Doherty Screeding Services | National Mental Health Hospital Portrane

Job: The National Forensic Mental Health Service (NFMHS) in Portrane
Smet Supported Partner:
B Doherty Screeding Services | Mobile Screed Factory
Product: 20,000 m2 Sopro Rapidur® B5 Rapid Drying Screed Binder

Related Downloads

TDS Sopro Rapidur® B5 Rapid Drying Floor Screed Binder

SMET Floor Screeds and Compounds Product Selector

Description

SMET supplied 20,000m2 of superior-quality Sopro Rapidur® B5 Rapid Drying Screed Binder to Smet Supported Partner, Brendan Doherty Screeding Services, for the flooring solution in the new hospital complex, The National Forensic Mental Health Service (NFMHS) in Portrane.

The NFMHS is a new state-of-the-art facility located 22 km from Dublin City in Portrane, North County Dublin. The project was awarded by Health Service Executive to the Joint Venture formed by OHL (50%) and OHL’s local delivery partner JJ Rhatigan (50%).

The flooring project was delivered as a total of 44,000m2 (24,000 m2 of Alpha Hemihydrate Sudanit 280 Screed by our Smet Supported Partner, Fast Floor Screed using their state-of-the-art Mobile Screed Factories and 20,000 m2 Rapidur® B5 Rapid Drying Floor Screed laid by industry experts, B Doherty Screeding Mobile Screed Factory.

German-made Rapidur® B5 Rapid Drying Screed Binder is a special polymer-modified binder for particularly economical ­production of high-strength, rapid-set cement screed – based on DIN 18560 – allowing early floor installation, and for laying to falls.  Rapidur® B5 is suitable for use on heated screeds, bonded screeds, unbonded screeds, and floating screeds. This flooring solution is particularly useful for fast-track or tightly scheduled screed laying. The newly laid Rapidur® B5 screed floor is ready to receive floor covering after approx. 3 days – after achievement of moisture content ≤ 1.8 % CM. Sopro Rapidur® B5 is supplied in 25kg bags, with 40 bags per pallet.

Key features of Rapidur® B5:

• Ready for tiling after only approx. 3 days
• Achieves grade CT-C45-F7 after 28 days*
• Pumpable
• For fast-track or tightly scheduled screed laying and laying to falls
• Suitable for floor heating systems
• Long working life: approx. 2–3 hours
• May be applied in mixing ratios 1:4 and 1:5
• High resistance to moisture migration from the substrate
• Suitable for renovation and refurbishment schemes
• EMICODE system of GEV (German Association for control of Emissions in Products for Flooring Installation): EC1PLUS R (‘very-low-emission-plus’) rating
• For indoor and outdoor use

SMET delivers another innovative, showcase flooring solution to their Smet Supported Partners.  Click the link to see a showcase of jobs recently completed by expert screeder, Brendan Doherty Screeding Services.

* Mixing ratio: 1: 5 (25 kg Rapidur® B5: 125 kg 0–8 mm screed sand to DIN EN 12 620)

B Doherty Fast Track Flooring | Bray Medical Centre | Collen Construction

Job: Bray Medical Centre for Collen Construction
Smet Supported Partner:
B Doherty Screeding Services
Product: Sopro Rapidur® B5 Rapid Drying Screed Binder

Related Downloads

TDS Sopro Rapidur® B5 Rapid Drying Floor Screed Binder

SMET Floor Screeds and Compounds Product Selector

Description

SMET supplied Sopro Rapidur® B5 Rapid Drying Screed Binder to Smet Supported Partner, Brendan Doherty Screeding Services, for the flooring solution in this fast track in Bray Medical Centre. B Doherty Screeding Services completed the flooring project on behalf of lead contractor Collen Construction.

German-made Rapidur® B5 Rapid Drying Screed Binder is a special polymer-modified binder for particularly economical ­production of high-strength, rapid-set cement screed – based on DIN 18560 – allowing early floor installation, and for laying to falls.  Rapidur® B5 is suitable for use on heated screeds, bonded screeds, unbonded screeds, and floating screeds. This flooring solution is particularly useful for fast-track or tightly scheduled screed laying. The newly laid Rapidur® B5 screed floor is ready to receive floor covering after approx. 3 days – after achievement of moisture content ≤ 1.8 % CM. Sopro Rapidur® B5 is supplied in 25kg bags, with 40 bags per pallet.

Key features of Rapidur® B5:

• Ready for tiling after only approx. 3 days
• Achieves grade CT-C45-F7 after 28 days*
• Pumpable
• For fast-track or tightly scheduled screed laying and laying to falls
• Suitable for floor heating systems
• Long working life: approx. 2–3 hours
• May be applied in mixing ratios 1:4 and 1:5
• High resistance to moisture migration from the substrate
• Suitable for renovation and refurbishment schemes
• EMICODE system of GEV (German Association for control of Emissions in Products for Flooring Installation): EC1PLUS R (‘very-low-emission-plus’) rating
• For indoor and outdoor use

SMET delivers another innovative, showcase flooring solution to their Smet Supported Partners.  Click the link to see a showcase of jobs recently completed by expert screeder, Brendan Doherty Screeding Services.

* Mixing ratio: 1: 5 (25 kg Rapidur® B5: 125 kg 0–8 mm screed sand to DIN EN 12 620)

B Doherty | Flooring at 70mm in Co Mayo | Rapidur® B5 Rapid Drying Screed

Job: Ballycastle, Co Mayo
Smet Supported Partner:
B Doherty Screeding Services
Product: Sopro Rapidur® B5 Rapid Drying Screed Binder

Related Downloads

TDS Sopro Rapidur® B5 Rapid Drying Floor Screed Binder

SMET Floor Screeds and Compounds Product Selector

Description

SMET supplied Sopro Rapidur® B5 Rapid Drying Screed Binder to Smet Supported Partner, Brendan Doherty Screeding Services, for the flooring solution in this private build in Ballycastle, Co Mayo. In total 300 m2 of Rapidur B5 was laid at 70mm at different thicknesses to incorporate tiles and timber flooring on UFH.  This project perfectly showcases the versatility of this powerfully strong, fast-drying flooring solution.

German-made Rapidur® B5 Rapid Drying Screed Binder is a special polymer-modified binder for particularly economical ­production of high-strength, rapid-set cement screed – based on DIN 18560 – allowing early floor installation, and for laying to falls.  Rapidur® B5 is suitable for use on heated screeds, bonded screeds, unbonded screeds, and floating screeds. This flooring solution is particularly useful for fast-track or tightly scheduled screed laying. The newly laid Rapidur® B5 screed floor is ready to receive floor covering after approx. 3 days – after achievement of moisture content ≤ 1.8 % CM. Sopro Rapidur® B5 is supplied in 25kg bags, with 40 bags per pallet.

Key features of Rapidur® B5:

• Ready for tiling after only approx. 3 days
• Achieves grade CT-C45-F7 after 28 days*
• Pumpable
• For fast-track or tightly scheduled screed laying and laying to falls
• Suitable for floor heating systems
• Long working life: approx. 2–3 hours
• May be applied in mixing ratios 1:4 and 1:5
• High resistance to moisture migration from the substrate
• Suitable for renovation and refurbishment schemes
• EMICODE system of GEV (German Association for control of Emissions in Products for Flooring Installation): EC1PLUS R (‘very-low-emission-plus’) rating
• For indoor and outdoor use

SMET delivers another innovative, showcase flooring solution to their Smet Supported Partners.  Click the link to see a showcase of jobs recently completed by expert screeder, Brendan Doherty Screeding Services.

* Mixing ratio: 1: 5 (25 kg Rapidur® B5: 125 kg 0–8 mm screed sand to DIN EN 12 620)

B Doherty | Fast Track flooring Hotel Co Cork | Rapidur® B5 Rapid Drying Screed

Job: Refurb hotel kitchen
Smet Supported Partner:
B Doherty Screeding Services
Product: Sopro Rapidur® B5 Rapid Drying Screed Binder

Merlin Barrier Coat

Related Downloads

TDS Sopro Rapidur® B5 Rapid Drying Floor Screed Binder

TDS Merlin Barrier Coat_SMET_Jan 19

SMET Floor Screeds and Compounds Product Selector

Description

New floor installation with fast-track – rapid drying floor screed solution, allowing early final flooring installation. 

SMET supplied Sopro Rapidur® B5 Rapid Drying Screed Binder to Smet Supported Partner, Brendan Doherty Screeding Services, for the rapid drying flooring solution in this hotel kitchen at 60 mm with SMET supplied DPM Merlin liquid DPM.  The newly refurbished floor was ready for MMA resin flooring in 5 days.

German-made Sopro Rapidur® B5 Rapid Drying Screed Binder is a special polymer-modified binder for particularly economical ­production of high-strength, rapid-set cement screed – based on DIN 18560 – allowing early floor installation.

Rapidur® B5 is suitable for use on heated screeds, bonded screeds, unbonded screeds, and floating screeds. This flooring solution is particularly useful for fast-track or tightly scheduled screed laying. The newly laid Rapidur® B5 screed floor is ready to receive floor covering after approx. 3 days – after achievement of moisture content ≤ 1.8 % CM. Sopro Rapidur® B5 is supplied in 25kg bags, with 40 bags per pallet.

SMET delivers another innovative, showcase flooring solution to their Smet Supported Partners.  Click the link to see a showcase of jobs recently completed by expert screeder, Brendan Doherty Screeding Services.

 

B Doherty | Fast Track flooring VHI Building Dublin | Rapidur® B5 Rapid Drying Screed

Job: VHI renovation of Old Church in Abbey Street Dublin
Smet Supported Partner:
B Doherty Screeding Services
Product: Sopro Rapidur® B5 Rapid Drying Screed Binder

Related Downloads

Description

New floor installation with fast-track – rapid drying floor screed solution, allowing early final flooring installation. 

SMET supplied Sopro Rapidur® B5 Rapid Drying Screed Binder to Smet Supported Partner, Brendan Doherty Screeding Services,  for the flooring solution for the administrative building of the newly renovated VHI HQ in Dublin. B Doherty Screeding Services completed the flooring project on behalf of lead contractor Collen Construction.

German made Rapidur® B5 Rapid Drying Screed Binder, is a special polymer-modified binder for particularly economical ­production of high-strength, rapid-set cement screed – based on DIN 18560 – allowing early floor installation.

Rapidur® B5 is suitable for use on heated screeds, bonded screeds, unbonded screeds and floating screeds. This flooring solution is particularly useful for fast-track or tightly scheduled screed laying. The newly laid Rapidur® B5 screed floor is ready to receive floor covering after approx. 3 days – after achievement of moisture content ≤ 1.8 % CM. Sopro Rapidur® B5 is supplied in 25kg bags, with 40 bags per pallet. SMET delivers another innovative, showcase flooring solution to their Smet Supported Partners.

Sopro Rapidur® B5 is supplied to our professional partners in 25kg bags, with 40 bags per pallet.

SMET delivers another innovative, showcase flooring solution to their Smet Supported Partners.  Click the link to see a showcase of jobs recently completed by expert screeder, Brendan Doherty Screeding Services.

The Sunday Business Post tells us:

‘The VHI is planning to develop new headquarters on top of the former Scots Presbyterian church hall on Abbey Street in Dublin city centre. The church will become the main entrance and foyer for the office building, while the church hall and former lecture theatre will have “a new lightweight glass and metal exoskeleton structure” of up to seven storeys built above and around them. Plans for the development, which have been submitted to Dublin City Council, were published on archiseek.com, an online discussion forum for architects. Designed by McCauley Daye O’Connell, the new building will integrate with the existing VHI offices and create a U-shaped building around the church, which will be refurbished’.

The Sunday Business Post

Maldron Hotel Swimming Pool Renovation Tiles and Tanking | Precision Building Services

Job: Maldron Hotel Swimming Pool Renovation, Portlaoise, Co. Laois.
Smet Supported Partner:
Precision Building Services – Mark Pemberton
Product: Sopro Rapidur® B5 Rapid Drying Screed Binder

Merlin Barrier Coat

Sopro RAM 3 (454) Renovation and Levelling Mortar

Sopro GD 749 Universal Floor and Wall Primer

Sopro DSF® 523 Tanking Membrane

Sopro PUK 503 PU Adhesive

Sopro VF HF 420 – VarioFlex® High Strength Flexible Tile Adhesive

Sopro’s No. 1 Flexible Tile Adhesive

Sopro FKM® XL 444 – Extra Light Weight Tile Adhesive

Sopro Sanitary Silicone

Sopro DE 014/015 Sealing Corners

Sopro FEP 508

Sopro DBF-638

Racofix 818

Related Downloads

Description

SMET supplied Smet Supported Partner, Precision Building Services (Mark Pemberton), for the renovation of the Maldron Hotel Swimming Pool, Portlaoise, Co. Laois. A total area of Floor screed @ 140m² | Wall tiling @125m² | Floor tiling @ 140 m² was completed.

New floor installation with fast-track – rapid drying floor screed solution, using Sopro Rapidur® B5 Rapid Drying Screed Binder, a fast setting screed which was laid to falls prior to waterproofing and tiling providing an early completion. German made Rapidur® B5 Rapid Drying Screed Binder is a special polymer-modified binder for particularly economical ­production of high-strength, rapid-set cement screed – based on DIN 18560.

Rapidur® B5 is suitable for use on heated screeds, bonded screeds, unbonded screeds and floating screeds. This flooring solution is particularly useful for fast-track or tightly scheduled screed laying. The newly laid Rapidur® B5 screed floor is ready to receive floor covering after approx. 3 days – after achievement of moisture content ≤ 1.8 % CM. Sopro Rapidur® B5 is supplied in 25kg bags, with 40 bags per pallet.

Sopro Rapidur® B5 was installed directly on top of Merlin Barrier Coat wet on wet. The screed was ready for waterproofing/tiling after 3 days. This system was also used to repair the Jacuzzi’s surrounding walls prior to waterproofing, tiling, and grouting.

Sopro RAM 3 levelled the deck area (3-60mm) between the drainage channel edge and pool perimeter movement joint. Sopro RAM 3 was bonded with Sopro GD 749.

Sopro No.1 tile adhesive created a notched finish on the walls of the drainage channel for Sopro RAM 3 to also level out. Finer repairs (0-10mm) on the channel wall were repaired with Sopro Repadur 10s. As the Sopro Repadur 10s is a highly polymer-modified, there was no need for priming bar pre-dampening with water.

Sopro DSF 523 Tanking Membrane was applied in 3 coats (2mm dried film thickness) to waterproof the deck screed, repaired drainage channels and surrounding shower area walls (pipe collars were also installed).

Sopro DBF-638 pre-folded tape, Sopro DE 014/015 Internal/External tape and Racofix 818 were also used in the overlapping and waterproofing of the wall/floor joints in the channel.

Capillary Seal (Sopro EPG 522: Fine Sand: Coarse Sand – 1:1:1) was installed around the perimeter of the pool where the drainage channel meets the deck screed. A 45-degree cut was made into the screed behind the RAM 3 wall repair and filled with the Capillary Seal mix, preventing pool water leeching into the screed and causing screed erosion.

Sopro PUK 503 polyurethane tile adhesive bonded the mosaic tiles to the jacuzzi once the repairs and waterproofing had finished. Sopro VF HF 420 fast setting high strength tile adhesive was used to bond the deck tiles. These tiles were then grouted with Sopro Titec Plus grout.   Sopro No.1 tile adhesive was also used to bond tiles to the drainage channel walls. Sopro FKM XL 444 tile adhesive was used to bond tiles to the surrounding walls and grouted with Sopro DF 10 Flexible designer grout. Sopro Sanitary Silicone sealed the pool perimeter movement joint after a 10mm packing foam cord was pressed into the joint.

Sopro FEP 508 epoxy grout was used to grout between where the perimeter edge tile met the capillary seal to create a full water-tight grout area.

Click

SMET TANKING & TILING E BOOK

 

SMET delivers another innovative, showcase waterproofing and tiling swimming pool solution to their Smet Supported Partners.

Check out another swimming pool tanking and tiling we supplied to John Sisk & Son, a full package of Sopro Tanking & Tiling, for the completion of 6,000m2 Quartzite Floor Tiling and 1,500 m2 Waterproofing & Tanking and completion of Wall Tiling.

 

B Doherty | Fast Track flooring Facebook Data Centre Clonee | Rapidur® B5 Rapid Drying Screed

Job: Facebook Data Centre – Administration Building
Smet Supported Partner:
B Doherty Screeding Services
Product: Sopro Rapidur® B5 Rapid Drying Screed Binder

Related Downloads

Description

New floor installation with fast-track – rapid drying floor screed solution, allowing early final flooring installation. 

SMET supplied Sopro Rapidur® B5 Rapid Drying Screed Binder to Smet Supported Partner, Brendan Doherty Screeding Services,  for the flooring solution for the administrative building of the newly built Facebook data centre in Clonee, Co Meath.

B Doherty Screeding Services completed the flooring project on behalf of lead contractor Clancy Construction.

German made Rapidur® B5 Rapid Drying Screed Binder, is a special polymer-modified binder for particularly economical ­production of high-strength, rapid-set cement screed – based on DIN 18560 – allowing early floor installation.

Rapidur® B5 is suitable for use on heated screeds, bonded screeds, unbonded screeds and floating screeds. This flooring solution is particularly useful for fast-track or tightly scheduled screed laying. The newly laid Rapidur® B5 screed floor is ready to receive floor covering after approx. 3 days – after achievement of moisture content ≤ 1.8 % CM. Sopro Rapidur® B5 is supplied in 25kg bags, with 40 bags per pallet. SMET delivers another innovative, showcase flooring solution to their Smet Supported Partners.

Sopro Rapidur® B5 is supplied to our professional partners in 25kg bags, with 40 bags per pallet.

SMET delivers another innovative, showcase flooring solution to their Smet Supported Partners.  Click the link to see a showcase of jobs recently completed by expert screeder, Brendan Doherty Screeding Services.

The IDA Ireland website tells us, “the total size of the facility to 621,000sq ft is the equivalent of 14 Aviva stadiums. The facility, Facebook’s first in Ireland and second in Europe, will become part of the infrastructure that enables billions of people to connect with the people and things they care about on Facebook and across its family of apps and services’. Ireland has been home to Facebook’s international headquarters since 2009 and the facility at Clonee continues Facebook’s significant investment in the country and in Europe. The company recently announced the creation of a further 200 jobs in Dublin in 2016, to add to the 1,300 employees it currently has. Tom Furlong, VP of Infrastructure at Facebook, said:  “We’re thrilled to have found a home in Clonee and begin building our new data centre as we continue to expand our infrastructure in Ireland. Everything here has been as advertised — from the strong pool of talent for construction and operations staff; to the great set of community partners who have helped us move forward quickly; to the opportunity to power our facility with 100% renewable wind energy.”

Source http://www.idaireland.com/ on 6th April 2016

Rapid-dry screed for VW Garage, Blackwater, Rapidur B5 by B Doherty Screeding

Job: Blackwater Motors_VW Garage
Smet Supported Partner:
B Doherty Screeding Services
Product: Sopro Rapidur® B5 Rapid Drying Screed Binder

Related Downloads

Description

New floor installation with fast-track – rapid drying floor screed solution, allowing early final flooring installation. SMET supplied Sopro Rapidur® B5 Rapid Drying Screed Binder to Smet Supported Partner, Brendan Doherty Screeding Services for the flooring element of this VW car showroom in Blackwater.

The rapid drying floor made with German-made Rapidur® B5 Rapid Drying Screed Binder is a special polymer-modified binder for particularly economical ­production of high-strength, rapid-set cement screed – based on DIN 18560 – allowing early floor installation. Rapidur® B5 is suitable for use on heated screeds, bonded screeds, unbonded screeds and floating screeds. This flooring solution is particularly useful for fast-track or tightly scheduled screed laying. The newly laid Rapidur® B5 screed floor is ready to receive floor covering after approx. 3 days – after achievement of moisture content ≤ 1.8 % CM. Sopro Rapidur® B5 is supplied in 25kg bags, with 40 bags per pallet. SMET delivers another innovative, showcase flooring solution to their Smet Supported Partners.

The newly laid Rapidur® B5 screed floor is ready to receive floor covering after approx. 3 days – after achievement of moisture content ≤ 1.8 % CM. Sopro Rapidur® B5 is supplied in 25kg bags, with 40 bags per pallet. SMET delivers another innovative, showcase flooring solution to their Smet Supported Partners.

Sopro Rapidur® B5 is supplied in 25kg bags, with 40 bags per pallet. SMET delivers another innovative, showcase flooring solution to their Smet Supported Partners.  Click this link to see a showcase of jobs completed by Brendan Doherty Screeding Services.

New Rapidur B5 Screed Floor VW showroom Sligo laid by Aidan Needham Floor Screed

Job: VW Showroom Sligo
Smet Supported Partner:
Aidan Needham Floor Screed
Products: Sopro Rapidur® B5 Rapid Drying Screed Binder

Sopro VF 419 – VarioFlex® Silver Large-Format Flexible Tile Adhesive

Related Downloads

Description

New floor installation with fast-track – rapid drying floor screed solution, allowing early final flooring installation. SMET supplied Sopro Rapidur® B5 Rapid Drying Screed Binder to Smet Supported Partner, Aidan Needham Floor Screed for the rapid flooring element of this newly refurbished showroom in Sligo, for principal contractor, John Healy Construction.

The rapid drying floor made with German-made Rapidur® B5 Rapid Drying Screed Binder, is a special polymer-modified binder for particularly economical ­production of high-strength, rapid-set cement screed – based on DIN 18560 – allowing early floor installation. Rapidur® B5 is suitable for use on heated screeds, bonded screeds, unbonded screeds and floating screeds. This flooring solution is particularly useful for fast-track or tightly scheduled screed laying. The newly laid Rapidur® B5 screed floor is ready to receive floor covering after approx. 3 days – after achievement of moisture content ≤ 1.8 % CM. Sopro Rapidur® B5 is supplied in 25kg bags, with 40 bags per pallet.

The newly laid Rapidur® B5 screed floor is ready to receive floor covering after approx. 3 days – after achievement of moisture content ≤ 1.8 % CM.

Tiles were laid using TDS Sopro VF 419 – VarioFlex® Silver Large-Format Flexible Tile Adhesive, a silver-grey, highly flexible, high-coverage, extra-rapid-set, cementitious thin, medium and floating-bed tile adhesive for the efficient laying of tiles and discoloration-sensitive natural stone units.  This adhesive was chosen for its particular suitability for large-format units and also on calcium sulphate screeds.

SMET delivers another innovative, showcase screed and tiled flooring solution to their Smet Supported Partners.

Sopro Rapidur® B5 and Sopro VF 419 Adhesive are supplied in 25kg bags, with 40 bags per pallet.

Click this link to see a showcase of B5 jobs completed by other Smet Supported Partners.

New rapid-dry floor for Audi Showroom Cork with Rapidur B5 by B Doherty Screeding

Job: Audi Showroom Cork
Smet Supported Partner:
B Doherty Screeding Services
Product: Sopro Rapidur® B5 Rapid Drying Screed Binder

Related Downloads

Description

New floor installation with fast-track – rapid drying floor screed solution, allowing early final flooring installation. SMET supplied Sopro Rapidur® B5 Rapid Drying Screed Binder to Smet Supported Partner, Brendan Doherty Screeding Services for the flooring element of this newly refurbished Audi showroom in Co Cork, in a Floating Floor Screed Construction with UFH (Underfloor heating).

The rapid drying floor made with German-made Rapidur® B5 Rapid Drying Screed Binder, is a special polymer-modified binder for particularly economical ­production of high-strength, rapid-set cement screed – based on DIN 18560 – allowing early floor installation. Rapidur® B5 is suitable for use on heated screeds, bonded screeds, unbonded screeds and floating screeds. This flooring solution is particularly useful for fast-track or tightly scheduled screed laying. The newly laid Rapidur® B5 screed floor is ready to receive floor covering after approx. 3 days – after achievement of moisture content ≤ 1.8 % CM. Sopro Rapidur® B5 is supplied in 25kg bags, with 40 bags per pallet. SMET delivers another innovative, showcase flooring solution to their Smet Supported Partners.

The newly laid Rapidur® B5 screed floor is ready to receive floor covering after approx. 3 days – after achievement of moisture content ≤ 1.8 % CM. Sopro Rapidur® B5 is supplied in 25kg bags, with 40 bags per pallet. SMET delivers another innovative, showcase flooring solution to their Smet Supported Partners.

Sopro Rapidur® B5 is supplied in 25kg bags, with 40 bags per pallet. SMET delivers another innovative, showcase flooring solution to their Smet Supported Partners.  Click this link to see a showcase of jobs completed by Brendan Doherty Screeding Services.