Sopro RAM 3 (454) Renovation and Levelling Mortar

Universal, grey, sag-resistant, rapid-set, fibre-reinforced, cementitious render and surface filler for smoothing, patching and rendering of wall and floor surfaces. For application to mineral substrates, e.g. concrete and masonry. Excellent workability and mouldability. Ideal for renovation and refurbishment. Ready for tiling after only 2 hours. Suitable as plinth render, for formation of angle fillets and to create falls, for use in damp and wet spaces, and on balconies, patios and steps/stairways. The mortar’s rapid strength development allows early removal of uneven patches in filler coat using plasterer’s lattice plane. Low-chromate to Regulation (EC) No 1907/2006, Annex XVII

Sopro RAM 3 is suitable for rendering, patching, smoothing and levelling of walls, floor and ceiling surfaces in concrete (to DIN 1045) and in pumice, clay, calcium-silicate and composite masonry. For producing level, plumb and true substrates for subsequent installation of ceramic, natural and cast stone coverings. Particularly suitable for renovation and refurbishment works, offering excellent mouldability. Also suitable for formation of angle fillets, as plinth render and as levelling coat to provide falls where the structural substrate has no gradient, in damp and wet spaces or on balconies and patios. Once set, Sopro RAM 3 454 is water-vapour-permeable and resistant to water and freeze-thaw cycles.

Related Downloads

icon-pdf TDS Sopro RAM 3 454 – Renovation and Levelling Mortar

icon-pdf SMET Professional Tiling Systems Brochure

icon-pdf TDS SMET_Tiling Onto Calcium Sulphate Floor Screed_Oct 2017

icon-pdf SMET Floor Screeds and Compounds Product Selector

NBSplus NBS Specification Clause

BIM BIM Objects

Featured Benefits of Sopro RAM 3 454 Renovation and Levelling Compound

  • For 3–60 mm coat thicknesses1)
  • Excellent sag resistance and mouldability, even with greater coat thicknesses
  • Allows early loading, ready to receive ceramic covering after only 2 hours
  • Suitable for levelling coats laid to falls
  • Excellent mouldability
  • For rapid progress on site
  • Particularly sag-resistant
  • Also easy to apply by plastering machine
  • EMICODE system of GEV (German Association for Control of Emissions in Products for Flooring Installation): EC1 R (“very-low-emission”) rating
  • DGNB (German Sustainable Building Council): Top quality level 4, Line 82)
  • For walls, floors and ceilings
  • For indoor and outdoor use
1) 60 mm for single, full-surface application
2) Based on DGNB (German Sustainable Building Council) criterion “ENV1.2 Local Environmental Impact” (2015 version).

Technical Details Sopro RAM 3 454 Renovation and Levelling Compound

Coat Thickness 3 – 60 mm in single operation
Mixing Ratio (water only) 4.5–5.0 ltr water : 25 kg Sopro RAM 3 454
0.9–1.0 ltr water : 5 kg Sopro RAM 3 454
Pot Life Approx. 20 minutes
Coverage Approx. 1.5 kg/m² per mm coat thickness; as angle fillet/junction seal, approx. 0.4–0.5 kg/m
Maturing Time 3 – 5 minutes
Consumption Rate 25 kg Sopro RAM3 454 dry mortar yields approx. 14.5 ltr fresh mortar; accordingly, for 10 mm
coat thickness, 25 kg dry mortar suffices for approx. 1.7 m² rendered area
Ready for Tiling After approx. 2 hours at +20 °C; after 24 hours at +5 °C
Composition Portland cement-based premixed dry mortar of strength class CS IV to DIN EN 998-1, containing selected mineral aggregate and special polymers.
Material values Highly polymer-modified cement mortar
Reaction to fire: A1/A1fl
Compressive strength: ≥ 20 N/mm²
Bulk density of hardened mortar: 1.75 kg/dm³
Tensile adhesion strength: ≥ 1.5 N/mm² and fracture pattern B
Water absorption W: < 0.1
Application Temperature From +5 °C to max. +35 °C (substrate, air, material)
Yield 25 kg Sopro RAM 3 dry mortar yields approx. 14.5 ltr fresh mortar; accordingly, for 10 mm coat thickness, 25 kg dry mortar suffices for approx. 1.7 m² rendered area
Specified Times Apply for normal temperature range of +23 °C and 50 % relative humidity; higher temperatures shorten and lower temperatures lengthen these times
Tools and Cleaning Mixer, plastering machine, mixing attachment, cranked-handle trowel, float trowel, finishing trowel, spatula, straightedge, felt float, plasterer’s lattice plane, coving trowel (for angle fillets); wash tools with water immediately after use
Packaging 25kg and 5kg bags

Available in 25kg and 5 kg Bags