Smet Supported Partner, Fast Floor Screed Ltd, pump-applied our self-levelling, Südanit 280 Alpha Hemihydrate Screed in this blast chiller facility situated in the factory of DC Poultry in Rathcoole. This CE marked, self-smoothing, self-levelling screed is the most technologically-advanced floor screed available, complying with the performance requirements of EN 13813. Südanit 280 Alpha Hemihydrate Screed’s advanced composition means that it reacts with water quickly – providing consistent, reliable drying characteristics and considerably faster drying times – enabling following trades to proceed without delay. Smet Building Products Ltd in partnership with Fast Floor Screed Ltd, demonstrate, once again, a superior level of customer service, both pre and after care. Whether your job is self-build, retro-fit, floor renovation, design, commercial or an industrial venture – we have a floor compound suitable for you. Contact Smet Building products Ltd
New floor installation with fast-track – rapid drying floor screed solution. SMET supplied Sopro Rapidur® B5 Rapid Drying Screed Binder to Smet Supported Partner, Brendan Doherty Screeding Services, for the flooring renovation of 150 m2 @ 30mm to 90mm bonded in Cadbury’s Dublin. German made Rapidur® B5 Rapid Drying Screed Binder, is a special polymer-modified binder for particularly economical production of high-strength, rapid-set cement screed – based on DIN 18560 – allowing early floor installation. Rapidur® B5 is suitable for use on heated screeds, bonded screeds, unbonded screeds and floating screeds. This flooring solution is particularly useful for fast-track or tightly scheduled screed laying. The newly laid Rapidur® B5 screed floor is ready to receive floor covering after approx. 3 days – after achievement of moisture content ≤ 1.8 % CM. Sopro Rapidur® B5 is supplied in 25kg bags, with 40 bags per pallet. SMET delivers another innovative, showcase flooring solution to their Smet Supported Partners. Click the link to see a showcase of jobs completed by Brendan Doherty Screeding Services.
New floor installation with fast-track – rapid drying floor screed solution, allowing early final flooring installation. SMET supplied Sopro Rapidur® B5 Rapid Drying Screed Binder to Smet Supported Partner, Brendan Doherty Screeding Services, for the flooring renovation of 1000 m2 over UFH. German made Rapidur® B5 Rapid Drying Screed Binder, is a special polymer-modified binder for particularly economical production of high-strength, rapid-set cement screed – based on DIN 18560 – allowing early floor installation. Rapidur® B5 is suitable for use on heated screeds, bonded screeds, unbonded screeds and floating screeds. This flooring solution is particularly useful for fast-track or tightly scheduled screed laying. The newly laid Rapidur® B5 screed floor is ready to receive floor covering after approx. 3 days – after achievement of moisture content ≤ 1.8 % CM. Sopro Rapidur® B5 is supplied in 25kg bags, with 40 bags per pallet. SMET delivers another innovative, showcase flooring solution to their Smet Supported Partners. Click the link to see a showcase of jobs completed by Brendan Doherty.
It is manufactured from a controlled blend of selected aggregates, hydraulic and building lime to EN 459-1 and other components to give a high-quality rendering product suitable for external rendering and internal plastering. This CE-marked product is a factory-produced Hydraulic Lime Plaster, specially designed for hand and machine application produced to DIN EN 998-1: 2003.
The product’s unique properties such as; high water vapour permeability (breathability), sustainability, and the special composition which allows constant hygrometric exchange between the substrate and the environment, were the key drivers in the selection of this lime system.
Smet Supported Partner, Colman Howard Lime Plastering applied high-quality products to a high-class finish. Another showcase of sympathetic restoration, using top-quality Lime products available from Smet Building Products Ltd. The overall building contractor was Gowen ConstructionBallyhooly, Mallow, Co. Cork.
Colman Howard Lime Plastering tells us a bit more about the significance of the renovation: “The building provides an imposing feature on Patrick Street, offering an unusual gable-fronted façade to the streetscape. Its varying but symmetrical openings enhance its tall form, which is articulated by the render plasters and sill courses. The oculus opening is an unusual feature highlighted by its moulded render surround. During surveying works, the historic building’s original pitch pine ceiling was uncovered, a masterpiece in carpentry. A local architect was engaged to redesign the store, dividing it into two retail units and we were very proud to be awarded the contract to be involved in this restoration, our reputation has been built on the quality of our work and the skill and expertise of our craftsmen, this project offered us the opportunity to showcase our skills to the full”. Well done teams!
Our comprehensive range of NHL restoration and preservation products, combined with exceptional technical support and aftercare, are the key drivers in the selection of SMET natural conservation products.
Industrial building floor renovation opts for Protein and Casein free CASEA Bauprotec BAM 20 up to 1800 m2. SMET supplied Bauprotec BAM 20 to to Smet Supported Partner, Brendan Doherty Screeding Services, for the flooring renovation solution in the redevelopment of the Laboratory. Bauprotec BAM 20 is a cement based, polymer modified levelling screed compound, ideal for renovating or levelling cementitious, calcium sulphate and concrete based floors. German made Bauprotec BAM 20 is designed for both hand and pump application of thicknesses between 1.5 – 20mm. The product can be applied over underfloor heating and is suitable for commercial and office use where rolling castor movements occur. The material complies with EN13813: 2002 and is CE marked. Designation: CT-C25-F5. Bauprotec BAM 20 is designed for levelling of floors in residential, offices and public buildings where the requirement for surface tensile strength is >1.0 N/mm². The levelled floor can be covered with ceramics, terrazzo, PVC, linoleum, cork and floating parquet. Protein and Casein free, it’s available in 25kg Bags – 42 bags per pallet. SMET delivers another innovative, showcase flooring solution to their Smet Supported Partners.
Bauprocalc KG Hydraulic Lime Skim Coat and NHL 3.5 Binder were specially selected for the internal restoration & re-plastering of this beautiful historical home dating from 1800’s by local contractors; Kevin Sweeney Construction Plastering. The selective hydraulic strength development of CE marked SMET NHL binders make them particularly suitable for producing lime mortars for masonry work, rendering and plastering. NHL binders, available from SMET and through distribution partner Haldane Fisher, are particularly suited for ecological new build, restoration and preservation works. The product’s special composition allow the mortar to breathe and permits constant hygrometric exchange between the substrate and the environment. The unique properties of Bauprocalc KG such as; high water vapour permeability (breathability), sustainability, machine application and quality credentials (produced to DIN EN 998-1: 2003 and CE marked), were key drivers in the selection of this conservation plastering system. Another show case of sympathetic historic building restoration, using top quality NHL products available from Newry based, Smet Building Products Ltd. The comprehensive range of NHL restoration and preservation products, combined with exceptional technical support and aftercare provided by SMET, are key drivers in the selection of their conservation systems. ISO 9001 and ISO 14001 accredited Smet Building Products Ltd, demonstrating – once again – best practice in supporting their selected partners.
SMET NHL 3.5 Binder was specially selected for the external restoration & re-plastering of this period home by Smet Supported Partner, Fintan Farrell Conservation. SMET NHL 3.5 is a high-quality pure Natural Hydraulic Lime binder, produced under an ISO 9001:2008 and ISO 14001:2004 quality system to EN 459-1. The moderate hydraulic strength development of SMET NHL 3.5 makes it suitable for producing lime mortars for masonry work, rendering, plastering base coats and limecrete. As SMET NHL 3.5 is a moderately hydraulic lime binder, used for the production of mortars, it’s particularly suited for ecological new build, restoration and preservation works. The product’s special composition allows the mortar product to breathe and also permits constant hygrometric exchange between the substrate and the environment. As a result, the building retains its historical character befitting its age.Another show case of sympathetic historic building restoration, using top quality NHL products available from Newry based, Smet Building Products Ltd. The range of NHL products, combined with exceptional technical support and aftercare provided by SMET, are key drivers in the selection of their conservation systems. ISO 9001 and ISO 14001 accredited Smet Building Products Ltd, demonstrating – once again – best practice in supporting their selected partners.
SMET NHL 5 Binder was specially selected for the repointing finish of the unique renovation of Coliemore Harbour walls in picturesque Dalkey, Co Dublin. The eminent hydraulic strength development of SMET NHL 5 makes it suitable for producing lime mortars for masonry work, rendering, plastering base coats and limecrete for use in extreme weather environments and exposed areas. The product’s special composition allows the mortar product to breathe and also permits constant hygrometric exchange between the substrate and the environment. NHL binders, available directly from SMET and distribution partner Haldane Fisher, are particularly suited for ecological new build, restoration and preservation works.
This is another show-case example of sympathetic historic restoration, using top quality NHL products from SMET. The comprehensive range of NHL restoration and preservation products, combined with exceptional technical support and aftercare provided by SMET, are key drivers in the selection of their conservation façade systems. ISO9001, ISO14001 and ASBP accredited Smet Building Products Ltd, demonstrating – once again – best practice in supporting their selected partners in SMET natural hydraulic lime and lime products
SMET supplied a range of Streetscape® BS 7533 compliant materials including; Streetscape® High Strength Bedding Concrete ECO, Streetscape® Rapid-Set Jointing Mortar ECO and priming mortar to Smet Supported Partners, FP McCann, who managed the streetscape regeneration of the busy retail area of Portland Avenue in Glengormley. The natural beauty of the stone paving compliments the modern aspect of the newly constructed hardscaping. The SMET Streetscape® portfolio complies with the rigorous requirements of BS 7533 with all products undergoing independent testing and certification to confirm compliance. By providing a superior level of customer service and focused aftercare to their Smet Supported Partners, Smet Building Products Ltd, with the Streetscape® brand, demonstrates best-practice in Streetscape construction partnerships.
Newry-based Smet Building Products Ltd, supplied Streetscape® BS 7533 compliant laying course materials including; bedding course, jointing and priming mortars, to Scottish-based principal contractor, RJ McLeod (Contractors) Ltd for the hardscape element of the new Helix Park project. The hardscape element of the Helix Park, comprising of open-space paving and connecting pathways, totalling 9,000 m2 of granite paving, was expertly laid by paving contractor, Granite Paving Specialist Ltd. The SMET Streetscape® portfolio complies with the rigorous requirements of BS 7533 with all products undergoing independent testing and certification to confirm compliance. By providing a superior level of customer service and focused aftercare to their Smet Supported Partners, Smet Building Products Ltd, with the Streetscape® brand, demonstrates best-practice in Streetscape construction partnerships. Click for more detailed information on the SMET Streetscape® BS 7533 range.
