Sopro VS 582 Leveller | Maco Construction | Floor Renovation Co Armagh

Description

Does your floor need a tricky refurb or a change of surface?  Our Smet Supported Partner, contractor Maco Construction, uses a practical solution for professional flooring contractors or tilers.

VS 582 is a self-levelling smoothing screed with excellent mouldability for laying to falls.  A flexible, self-levelling, mouldable, rapid-set, cementitious, fibre-reinforced surface filler, with 2-in-1 formulation for simultaneous levelling and creation of falls. Excellent workability and mouldability because you also have the flexibility of adding water.

It’s strong, with a compressive strength after 28 days: approx. 35 N/mm² (as levelling coat laid to falls), dries quickly and is pumpable!

With numerous tricky floor levels and coverings, holes, steps and uneven surfaces, and a quick turnaround needed, a complete renovation was in order.  See the video above for the complete overhaul and renovation.

Sopro EPG 1522 Epoxy primer was utilised in this project as an adhesion promoter on smooth (Terrazzo) substrates, as a liquid damp proof membrane in areas where moisture-sensitive floor finishes were going to be installed. The product was also used to fill cracks in the existing substrates and change of substrates. As an extra precaution, Sopro PG-X Armour Mesh was installed before the installation of Sopro VS 582 levelling screed to improve crack-bridging performance and stress relief.

VS 582 Leveller | filler | leveller | lays to falls

Sopro VS 582 | self leveller | excellent filler and easily lays to falls

Sopro VS 582 | dried | modulable and easy to use

Benefits of Sopro VS 582

• 3 – 70 mm coat thickness
•  For floors, indoors and outdoors
• 2-in-1 formulation: suitable as self-levelling filler and for laying to falls
• Compressive strength after 28 days: approx. 35 N/mm² (as levelling coat laid to falls)
• Flexural tensile strength after 28 days: approx. 7 N/mm² (as levelling coat laid to falls)
• Self-levelling
• Outstanding mouldability when laid to falls
• Quick-drying
• Flexible, fibre-reinforced
• Pumpable
• Suitable for timber flooring
• Suitable for floor heating systems
• Long working life: 30 – 40 minutes
• Walkable after 2 – 3 hours

SMET delivers another innovative, showcase flooring solution to its professional contractors. Click below to see other jobs using Sopro levellers.

SMET is renowned for its comprehensive range of professional CE-marked, EPD-certified products.

The SMET flooring range includes: calcium sulphate-based screed binders, self-smoothing calcium sulphate-based screeds & compounds, cement-based screed binders, self-smoothing cement-based screeds, lightweight flowing screeds, professional tiling materials & tools, tanking and wet-room solutions, barrier coats, primers & bonding agents; for any domestic, commercial, industrial or design-flooring use.

Suffice it to say, the SMET product portfolio includes a German-made floor solution for any new or repair flooring requirement. Get in touch for your upcoming floor screed or tiling project.