CASEA Casufloor C30 F6 Alpha Hemihydrate Screed

CASEA Alpha Hemihydrate screed Casufloor C30/F6 is a pumpable, high-quality screed material based on Calcium Sulphate. It is supplied as a pre-blended dry powder and is designed for application at thicknesses of between 30 and 90 mm. Casufloor C30/F6 complies with EN13813: CA-C30-F6 and is CE-marked.

German-made CASEA Casufloor C30/F6 – Alpha Hemihydrate Screed is suitable for floors in homes, offices, public buildings and places exposed to similar loads. The product may be applied as a levelling screed directly onto a load-bearing floor, unbonded on a separating barrier (polythene), as a floating floor and is particularly suited in conjunction with underfloor heating or cavity floors. Casufloor C30/F6 should be covered with a floor finish such as tiles, linoleum, parquet, cork or carpet. If a cement-based adhesive or smoothing compound is required, the surface of the screed has to be sealed first using an appropriate acrylic primer/sealer.

Related Downloads

icon-pdf  TDS CASEA Casufloor C30-F6 – Alpha Hemihydrate Screed

icon-pdf SMET Floor Screed and Compounds Product Selector

icon-pdfEPD Casufloor C30_F6 Flowing Screed

Benefits of Casufloor C30 F6 – Alpha Hemihydrate Screed

  • •Smooth Laitance Free Finish
  • •Pumpable
  • •Under Floor Heating – Full Encapsulation
  • •Suitable For Underlayment In Wet Areas
  • •Reduced Drying Times
  • •CE Marked
  • •EN 13813: 2002

Technical Detail for Casufloor C30 F6 – Alpha Hemihydrate Screed

Screed Specification CA-C30-F6 DIN EN 13813
Minimum Thickness Bonded: 25mm, Unbonded: 30 mm. Floating: Domestic: 35mm, Commercial: 40mm. Over Underfloor heating Pipes: 25mm (BS 8204-7)
Compressive strength ≥ 30.0 N/mm2
Flexural strength ≥ 6.0 N/mm2
Modulus Of Elasticity approx. 18 kN/mm²
Yield approx. 550 l/t; approx. 12.5 m2/t with 40 mm application thickness; approx. 22 l wet compound per 40 kg bag
Consumption approx. 18 kg/m2 each 1 cm
Water Demand approx. 6.5 – 7 l per 40 kg bag
Thermal Conductivity (Tabulated value) λR =1.40 W/mK
Grain Size 0 – 2 mm
Fire performance Construction material class A1, non-flammable
Packaging 40 kg bags and silos

Available in 40kg bags 30 per pallet, 1-tonne bags and site silos.

Floor Screeds & Compounds from Smet Building Products Ltd have been used throughout Europe for over 40 years. Our comprehensive German-made portfolio includes Calcium Sulphate Based Screed BindersSelf Smoothing Calcium Sulphate Based Screeds & Compounds, Cement-Based Screed Binders and Self Smoothing Cement Based Screeds, Lightweight Flowing Screeds & Compounds, Multi-Purpose & Repair Screed Mortars and Rapid drying solutions for Domestic, Commercial, Industrial, and Design use. The SMET range has a Floor Screed solution for any building requirement.