Stontex Platinum Stone Sealer 1L & 5L
This product is used to help protect natural stone paving, tiles, and brick from oil and water based staining. Treating your material with this sealer will also help make ongoing maintenance and cleaning much easier. It is a water-based odourless penetrating sealer, which will retain the existing colour of the stone, tile or brick. It is ideal for use internally in a confined space as there is no smell, however, it can also be used externally albeit our Rapid Dry Stone Sealer would be a better longer lasting solution for external surfaces. Even though Platinum Stone Sealer is water based it has a very high active ingredient content so the treated surface should perform for between 2-5 years depending on wear and tear.
Application Instructions Stontex Platinum Stone Sealer
It is important that the area you are treating be clean and dry prior to applying the sealer. Then you simply either roll on with a normal paint roller onto your paving or if you prefer you can spray using a knapsack sprayer for large areas or just a simple hand-held sprayer. Platinum Stone Sealer has been formulated as one coat treatment but you can apply an additional coat if your material is unusually porous for optimum protection. It is recommended that the freshly treated material is kept dry and free from footfall traffic for 3 to 6 hours after application.
Associated Products Stontex Platinum Stone Sealer
If required to deep clean your external cladding, contact our technical department for advice on what to use as possible a specialist contractor could be required. However if not heavily soiled and for ongoing maintenance use our Green to Clean product no need for constant power washing just spray and walk away. The active enzyme contained in Green to Clean keeps working for up to 9 months inhibiting the organic stains for reforming on the surface
Benefits Stontex Platinum Stone Sealer
- High-performance water-based and low odour formula
- Easy to apply one coat treatment
- Does not change the look or feel of the material
- Coverage rate up to 15sqm per litre depending on porosity of the material.
Available in 1L and 5L canisters.