Sopro FL 526 – Flexible Tile Grout (2 – 20mm joints)
A flexible, water-repellent, trass-bearing, cementitious tile grout, meeting CG2 WA requirements to DIN EN 13888, for grouting ceramic, fully vitrified stoneware, natural and cast stone coverings, and glass block assemblies. Rapid initial set for low-suction tiles, with specially tailored joint-filling properties and first-rate washability (removability). Suitable for balconies and patios, and in conjunction with wall and floor heating.
For grouting non-absorbent or low-suction ceramic coverings, e.g. stoneware and fully vitrified stoneware tiles, ceramic split tiles, clinker floor tiles, natural and cast stone finishes, and glass block assemblies. For use on balconies, patios, and in conjunction with floor heating.
Coverage: 1.5 – 2.0 kg/m² for 11.5 × 24 cm or 20 × 20 cm tiles and approx. 10 mm joint width /10 mm joint depth
Sopro FL is a flexible, frost-resistant, rapid-set, trass-bearing, cementitious tile grout for 2 – 20 mm joint widths. Rapid initial set for low-suction tiles, with specially tailored joint-filling properties and first-rate washability (removability). Excellent removability properties/time serve to minimize consumption rate. Where properly applied, Sopro FL offers crack-free curing while allowing early use of installed and grouted covering.
Standard Colours for FL 526 – Flexible Tile Grout (2 – 20mm joints)
Related Downloads
TDS Sopro FL 526 – Flexible Tile Grout
SMET Professional Tiling Systems Brochure
Featured Benefits of Sopro FL 526 – Flexible Tile Grout (2 – 20mm joints)
- For 2 – 20 mm joint widths
- For walls and floors, indoors and outdoors
- 30-minute working life
- Low-chromate to Regulation (EC) No 1907/2006, Annex XVII
- DGNB (German Sustainable Building Council): Top quality level 4, Line 8,
- based on DGNB (German Sustainable Building Council) criterion “ENV1.2
- Local Environmental Impact” (2015 version)
- DGNB (German Sustainable Building Council): Top quality level 4, Line 8,
- based on DGNB (German Sustainable Building
Technical Details for Sopro FL 526 – Flexible Tile Grout (2 – 20mm joints)
| Water requirement | 4.25 – 4.75 ltr water: 25 kg Sopro FL
0.85 – 0.95 ltr water: 5 kg Sopro FL Colours concrete grey, basalt, anthracite, and black: 5.00 – 5.50 ltr water: 25 kg Sopro FL 1.00 – 1.10 ltr water: 5 kg Sopro FL |
| Maturing Time | 3-5 minutes |
| Working Life | 30 minutes; stiffened mortar must not be retempered by the addition of water or fresh mortar to restore workability. |
| Walkable | After approx. 2 hours |
| Loadable | After approx. 12 hours |
| Application Temperature | Between +5 °C and max. +25 °C |
| Joint Width | 2 – 20 mm |
| Coverage | 1.5 – 2.0 kg/m² for 11.5 × 24 cm or 20 × 20 cm tiles and approx. 10 mm joint width /10 mm joint depth |
| Colours | 528 silver grey 17
526 grey 15 622 stone grey 22 529 concrete grey 14 627 sand grey 18 629 beige 32 624 jura beige 33 625 basalt 64 626 anthracite 66 628 black 90 |
Available in: Bag 25 kg 40 per pallet; bag 5 kg 200 per pallet
