Sopro FL Plus – Flexible Tile Grout (2 – 20mm joints)

Strong, flexible, frost-resistant, rapid-set, cementitious tile grout, meeting CG2 WA requirements to DIN EN 13888, for smooth, easy grouting of narrow and wide joints in wall and floor coverings, indoors and outdoors, to produce brilliantly coloured, lime-film-free finish. Low-chromate to Regulation (EC) No 1907/2006, Annex XVII.

Particularly suitable for grouting stoneware, fully vitrified stoneware, natural and cast stone coverings, split tiles, glass blocks and clinker floor tiles with 2–20 mm joint widths, to produce brilliantly coloured finish both indoors and outdoors. For public- and private-sector buildings, in conjunction with floor heating, in damp and wet spaces, on balconies and patios, and in many other areas. Optional enhancement through the addition of Sopro gold and silver glitter.

Strong, flexible, frost-resistant, rapid-set, cementitious tile grout for wide and narrow joints in wall and floor coverings, indoors and outdoors, to produce brilliantly coloured, lime-film-free finish. For smooth, easy grouting of stoneware, fully vitrified stoneware, natural and cast stone coverings, ceramic split tiles, glass blocks and clinker floor tiles. First-rate joint-filing properties and washability (removability) in conjunction with an optimum degree of filling. Enhanced protection for joints against mould formation and microorganisms plus lime-film-free finish ensure brilliantly coloured joint pattern with lasting appeal. Inherent water-beading effect and Hydrodur® technology create water- and dirt-repellent joints with antimicrobial capability. Also suitable for use in conjunction with floor heating. Sopro gold glitter or Sopro silver glitter can be added to create a distinctive, glistening joint finish.

Related Downloads

icon-pdf TDS Sopro FL Plus – Flexible Tile Grout 2-20mm

icon-pdf SMET E-BOOK TANKING & TILING

icon-pdf SMET How To – Tanking/Waterproofing System Flyer

icon-pdf SMET Professional Tiling Systems Brochure

icon-pdf EPD – Sopro FL Plus – Flexible Tile Grout

icon-pdf EPD_Sopro FL Plus–Flexible Tile Grout_SMET_Valid-until-25.9.27 

NBSplus SMET NBS Specification Clauses

Featured Benefits of Sopro FL Plus – Flexible Tile Grout (2 – 20mm joints)

• First-rate joint-filling properties and washability (removability)
• Optimum degree of joint filling
• Uniformly brilliant colouring and lime-film-free thanks to OPZ® (Portland cement-free) technology
• Easy-care due to water and dirt repellency
• Greater protection for joints against mould formation and microorganisms
• High crystalline water binding capacity
• High abrasion resistance: CG2 WA to DIN EN 13888
• Enhanced resistance, even to acidic cleaners*)
• Resistant to high-pressure cleaning equipment**)
• Walkable after only 2 hours, loadable after only approx. 12 hours
• Optional enhancement through the addition of Sopro gold and silver glitter
• For walls and floors, indoors and outdoors
• DGNB (German Sustainable Building Council): Top quality level 4, Line 8***)
• EMICODE system of GEV (German Association for Control of Emissions in Products for Flooring Installation): EC1PLUS (“very-low-emission-plus”) rating
• Approx. 12 months shelf-life, subject to storage on a pallet in dry conditions in original unopened containers

Technical Details for Sopro FL 526 – Flexible Tile Grout (2 – 20mm joints)

Mixing Ratio 2.85–3.3 ltr water : 15 kg Sopro FL plus
0.95–1.1 ltr water : 5 kg Sopro FL plus
Enhancement with Sopro glitter:
3.15–3.75 ltr water : 15 kg Sopro FL plus: max. 6 bags of Sopro gold or silver glitter
1.05–1.25 ltr water : 5 kg Sopro FL plus: max. 2 bags of Sopro gold or silver glitter
Maturing Time 3–5 minutes
Working Life 30 – 40 minutes; stiffened mortar must not be retempered by addition of water or fresh
mortar to restore workability.
Walkable After approx. 2 hours
Loadable Ready to accommodate mechanical loads after approx. 12 hours
Application Temperature Between +5°C and max. +25°C
Joint Width 2 – 20 mm
Coverage Approx. 0.4 kg/m² for 30× 60 cm tiles and approx. 5 mm joint width/10 mm joint depth;
0.7 – 1.0 kg/m² for 30 × 30 cm or 40 × 40 cm tiles and approx. 10 mm joint width/10 mm joint depth
Colours · 135 white 10

· 1131 light grey 16

· 1126 silver grey 17

· 1120 grey 15

· 1122 sand grey 18

· 1127 stone grey 22

· 1121 concrete grey 14

· 1125 basalt 64

· 1123 anthracite 66

· 1124 black 90

· 1133 jasmine 28

· 1132 light beige 29

· 1129 bahama beige 34

· 1130 jura beige 33

· 1134 brown 52

· 1128 bali brown 59

· glitter: 1019 gold glitter; 1020 silver glitter

Available in: Bag 15 kg bag, 5 kg bag; Glitter: 100 g bag (only available in box with Nr 10)

*) Compared to standard Sopro cementitious tile grouts for domestic applications

**) Standard domestic high-pressure cleaning equipment

***) Based on DGNB (German Sustainable Building Council) criterion “ENV1.2 Local Environmental Impact” (2015 version)