CASEA Casufloor FS Alpha Levelling Compound
CA-C30-F7 Casufloor FS Alpha Levelling Compound is a high-quality calcium sulphate alpha hemihydrate based, polymer-modified levelling compound or fine smoothing screed, for use at a thickness of between 2-10 mm. Casufloor FS complies with EN 13813 and is CE marked.
Casufloor FS is suitable for floors in homes, offices, public buildings and places exposed to similar loads. Casufloor FS may be applied as a levelling screed directly onto a load bearing floor. It should be covered with a floor finish such as tiles, linoleum, parquet, cork or carpet. If a cement-based adhesive is required the surface of the Levelling Compound must first be sealed, using an appropriate sealer i.e. Sopro Universal Floor Primer available from SMET, as directed.
Casufloor FS is ideally suited to level and patch repair Calcium Sulphate Flowing Screed, without the requirement for the flowing screed substrate to be dry. Casufloor FS can be used directly onto the screed next day after pouring a Calcium Sulphate Flowing Screed.
Benefits of Casufloor FS Alpha Levelling Compound
• Smooth Laitance Free Finish
• Next day application onto CA Base Screeds
• Pumpable – High Flowability
• Early Trafficking
• Very Low Shrinkage
• Reduced Drying Times
• CE Marked
• EN 13813: 2002
Technical Details for Casufloor FS Alpha Levelling Compound
|Screed Specification EN 13813: 2002|
|Maximum Thickness||10 mm|
|Minimum Thickness||2 mm|
|Use||Internal use only|
|Grain size||0 – 0.5 mm|
|Compressive Strength (28 days)||≥ 30 N/mm²|
|Flexural Strength (28 days)||≥ 7 N/mm²|
|Modulus of Elasticity||18 kN/mm²|
|Flow Rate||240 – 260 mm (Vicat Ring)|
|Hardening Time (Light foot traffic)||approx 8 hours|
|Hardening Time (final strength)||after 24 hours depending on thickness and site conditions|
|Water requirement||approx 6.5 l per 25kg bag|
Packaging: Available in 25kg bags, 42 bags per pallet.
Floor Screeds & Compounds from Smet Building Products Ltd have been used throughout Europe for over 40 years. Our comprehensive German-made portfolio includes Calcium Sulphate Based Screed Binders, Self Smoothing Calcium Sulphate Based Screeds & Compounds, Cement-Based Screed Binders and Self Smoothing Cement Based Screeds, Lightweight Flowing Screeds & Compounds, Multi-Purpose & Repair Screed Mortars and Rapid drying solutions for Domestic, Commercial, Industrial, and Design use. The SMET range has a Floor Screed solution for any building requirement.