Sopro TDS 823 – Two-component Turbo Tanking Slurry
High-performance, flexible, rapid-set, two-component, cementitious mineral sealing slurry used to produce crack-bridging waterproof coatings. For waterproofing normal, recessed and access balconies to DIN 18 531 Part 5, for waterproofing elements in contact with soil to DIN 18 533 Part 3, for water-roofing indoor spaces to DIN 18 534 Part 3, and for waterproofing tanks and pools to DIN 18 535 Part 3.
For installation of waterproof membranes indoors (e.g. in showers, washrooms, toilets) to DIN 18534 Part 3 for water action classes W0-I “Low”, W1-I “Moderate”, W2-I “High” and W3-I “Very high” (equivalent to Moisture Exposure Classes A and A0 to Construction Products List issued by DIBt (German Institute for Construction Technology) and ZDB (Federation of the German Construction Industry) datasheet).
For installation of waterproof membranes in tanks and pools (e.g. swimming pools) to DIN 18535 Part 3 for water action class W1-B “Up to 4 m water head” (equivalent to Moisture Exposure Class B to Construction Products List).
Long-term protection of elements in contact with soil (e.g. external basement walls) to DIN 18533 Part 3 for the following applications: W1-E 1) “Ground moisture and water without hydro-static pressure”, W2.1-E 2) “Moderate water pressure action”, W3-E 2) “Water without hydro-static pressure acting on buried suspended slabs” and W4-E 1) “Splash water acting on plinths and capillary water in and below buried walls”. Also suitable as a contact layer on existing bitumen and tar pitch waterproofings prior to application of Sopro waterproof bitumen coatings. For waterproofing normal, recessed and access balconies to DIN 18531 Part 5.
Also suitable for waterproof bonding of joints between Sopro AEB products and laps between Sopro waterproof sheet membranes, Sopro sealing tape, and Sopro fittings.
Featured Benefits of Sopro TDS 823 – Two-component Turbo Tanking Slurry
n Rapid-set (approx. 2 hours per coat), particularly suitable for cold season
n Rainproof after only approx. 2 hours
n Withstands 3 bar water pressure after only 6 hours
n Highly flexible, crack-bridging after only 6 hours
n For balconies and patios
n For damp and wet spaces
n For tanks and pools
n For elements in contact with soil
n Creamy consistency allows smooth application
n Vapour-permeable, fibre-reinforced, offering low-temperature flexibility
n For brush, roller, trowel, and spray application
n Certified low-temperature flexibility down to -20 °C: Class CM02P to DIN EN 14 891
n Low-chromate to Regulation (EC) No 1907/2006, Annex XVII.
Technical Details for Sopro TDS 823 – Two-component Turbo Tanking Slurry
|Mixing ratio||10 kg powder Component A : 10 kg liquid Component B (1 : 1 by weight)
4.5 kg powder Component A : 4.5 kg liquid Component B (1 : 1 by weight)
|Working life||30 – 40 minutes; stiffened membrane should not be retempered by addition of water or fresh mix to
|Drying time/rainproof||Approx. 2 hours per coat|
|Application temperature||Between +5 °C and +25 °C|
|Walkable||After 2 – 3 hours|
|Loadable||After approx. 2 days|
|Shelf life||Subject to storage on pallet in dry, frost-free conditions in original unopened containers:
Component A (powder): Approx. 12 months
|Tools||Finishing trowel, notched spatula, lambswool roller, thick/block brush; clean tools with water immediately
after use; mechanical cleaning required when set.
|Specified times||Apply for normal temperature range of +23 °C and 50 % relative humidity; higher temperatures shorten
and lower temperatures lengthen these times.
10 kg bag (powder Component A) and 10 kg canister (liquid Component B)
4.5 kg bag (powder Component A) and 4.5 kg canister (liquid Component B)
9 kg combi pack
20 kg combi pack
* Crack class R1-E and space use classes RN1-E to RN2-E. Crack class R2-E substrates as special construction.
** As special construction.