Sopro DFS ambiento® Designer Coloured Floor
Sopro ambiento® is a decorative, self-levelling, designer floor topping for production of even, hardwearing finished floor surfaces in dry interiors, e.g. in shops, boutiques, salesrooms, car showrooms, exhibition spaces, salons, workshops, foyers, offices, medical practices, lofts, restaurants, discotheques, living rooms, storerooms, cellar spaces and so on.
Sopro DFS is a hardwearing, self-levelling, rapid-set, cementitious designer floor topping for production of creative finished floor surfaces with high compressive strength, flexural tensile strength and abrasion resistance. Sopro DFS is suitable for use in dry interiors and offers excellent workability and hardened mortar properties thanks to Sopro Mikrodur® technology.
SMET Floor Screeds and Compounds Product Selector
Benefits of Sopro DFS ambiento®
• Unique, customized floor finishes
• Heavy-duty, extra-hard wearing
• For dry interiors
• EMICODE system of GEV (German Association for Control of Emissions in Products for Flooring Installation): EC1PLUS (“very-low-emission-plus”) rating
• DGNB (German Sustainable Building Council): Top quality level 4, Line 8*
• CE Marked
• Reaction to fire to DIN EN 13 501-1: A2fl-s1
Check out the Sopro DFS ambiento® brochure online
Technical Details for Sopro DFS ambiento®
|Suitable substrates||Cement and calcium sulphate screeds (heated/unheated), concrete (min. 6 months old)|
|Coat thickness||5 – 15 mm|
|Mixing ratio||4.75 – 5.25 ltr water: 25 kg Sopro DFS. Take care to ensure exact proportioning of water.|
|Flow table value||24.0 – 25.0 cm (Vicat ring to DIN 1164; size: internal diameter 65 mm at top and 75 mm at bottom, height 40 mm; on suitable, dry, clean glass plate)|
|Pot Life||30 – 40 minutes; stiffened mortar should not be retempered by addition of water or fresh mortar to restore workability.|
|Walkable||After 2 – 3 hours|
|Fully loadable||As finished floor surface: after approx. 24 hours per cm coat thickness|
|Application temperature||Between +5 °C and max. +25 °C|
|Coverage||Approx. 1.7 kg/m² per mm coat thickness|
|Abrasion resistance||From min. 8 mm coat thickness, able to accommodate loads from lift stackers and chair castors to EN 12 529; suitable for pneumatic- and solid-rubber-tyred vehicles (industrial trucks)|
|Shelf life||Approx. 6 months, subject to storage in original unopened containers|
|Packaging||25 kg bag|
Available in 25kg bags.
*For technical reasons, the colours shown here may diverge from those of the fully cured material.
**Based on DGNB (German Sustainable Building Council) criterion “ENV1.2 Local Environmental Impact” (version 2015)