Clean Wall® PROTECT – Facade Paint
PROTECT Facade Paint is a driving-rain proof, dirt-repellent and highly opaque facade paint free from algicides, fungicides, solvents, and plasticisers. PROTECT Facade Paint is a ready-for-application, slightly filling facade paint for initial and renovation paint coats on plaster, fair-faced masonry, concrete, and fixed mineral paints.
Suitable substrates Clean Wall® PROTECT – Facade Paint
The surface must be clean, dry and viable. Observe the guidelines of VOB (Construction Tendering and Contract Regulations), part C, DIN 18 363, sec. 2 and 3 as well as the BFS information sheets. Remove non-adhesive old paints completely. Treat algae and mould chemically and remove residues. Remove dust, loose parts of plaster, old, non-sticking coatings and sinter layers. Clean intact old paint layers. Resistant against alkaline substrates, but wait 4 weeks before coating new, highly alkaline plasters. Insulate expected penetrations on the basis of nicotine, rust or other substances beforehand. Prime chalky old paints and highly absorbent mineral surfaces (e.g. plasters, gypsum blocks) with DEEP primer.
Tinting Clean Wall® PROTECT – Facade Paint
Up to a maximum of 5% with adequate tinting and full-tone colours (no tinting possible with tinting colours for mineral colours). Check the compatibility in every case. Apply mixed product immediately. Tinting can change the defined characteristics. In the case of adding higher quantities of tinting colours or mixing pastes, the product might thicken and shrinkage cracks might appear in the dried paint film. Contact SMET technical for advice.
Technical Details for Clean Wall PROTECT – Facade Paint
|Colour||Bright white, matt|
|Specific weight||1.42-1.46 kg/l|
|Base||Dispersion, mineral, titanium dioxide|
|pH value||10.5 – 11.4|
|sd value [m]||0.03|
|Dilution||The product is ready to use and anti-drip.
To be used undiluted in normal applications.
If required, dilute with max. 5 % of water.
|Consumption||Approx. 125-150 ml/m2, depending on the surface type.
Determine the exact consumption for the calculation on the object.
|Application||Brush, roller or spray|
|Drying||Dry surface after approx. 1 h; painting possible after
approx. 8 h, hard-dried after 2-3 days. At lower temperatures and/or higher humidity, the drying time is extended.
|Dilution||with a maximum of 5% of water|
|Contrast ratio (hiding power)||Class 1 according to DIN EN 13300 with a spreading rate
of 7 m²/l
|Wet rub resistance||Class 2 according to DIN EN 13300
corresponds to abrasion resistance according to DIN 53778
|Tinting||with a maximum of 5% of customary full-tone and tinting colours
(no tinting possible with tinting colours for mineral colours!).
Adding tinting colours and tinting pastes will result in changes to the advertised characteristics.
CLEAN WALL® PROTECT – Facade Paint: Available in Buckets: 12.5 l bucket
CLEAN WALL® – available from SMET, is a groundbreaking product system, unparalleled in the market, aimed at clients who seek holistic solutions for their new-build or refurbishment project. Co-ordinated components cover everything from priming and preparation to paints – delivering superior-quality stunningly beautiful internal and external wall finishes.