Sopro FKM® Silver 600 Extra Rapid Set Tile Adhesive
A silver-grey, multi-purpose, high-coverage, rapid-set, highly polymer-modified, cementitious flexible tile adhesive, meeting C2 FT S1 requirements to DIN EN 12004, with original Rhenish trass. For installation of ceramic wall and floor coverings, in particular for light-coloured, deformation-sensitive natural stone tiles. For large-format fully vitrified stoneware wall and floor coverings. For balconies and patios. Suitable for use in conjunction with wall and floor heating and waterproof membranes. Creamy consistency and exceptionally smooth workability, though still with high sag resistance. With celebrated 4-in-1 formulation. Ideal for tightly scheduled contracts thanks to rapid set.
Wall and floor tile products: earthenware, stoneware and fully vitrified stoneware tiles, ceramic split tiles and split tile fittings, clinker floor tiles, light-coloured, discoloration-sensitive and translucent natural stone units, cast stone units, dishing-prone, resin-bonded tiles, e.g. agglomerate tiles. Particularly suitable for large-format fully vitrified stoneware units. Suitable for filling and levelling out irregularities on limited wall and floor areas with up to 20 mm thick coats (for drylining/dry construction and mastic asphalt screeds, max. 5 mm coat thickness). For fast-track refurbishment/renovation on tightly scheduled projects. In private housing, commercial and industrial facilities, hospitals, public buildings, airports, railway stations etc.
Featured Benefits of Sopro FKM® Silver 600 Extra Rapid Set Tile Adhesive
■ For walls and floors, indoors and outdoors
■ C2: tensile adhesion strength ≥ 1.0 N/mm2
■ F: early tensile adhesion strength ≥ 0.5 N/mm2 after 6 hours
■ T: thixotropic – high sag resistance due to special fibre reinforcement
■ S1: deformability ≥ 2.5 mm
■ Walkable and groutable: after approx. 2 hours
■ Extra-sag-resistant for laying natural stone coverings
■ Silver-grey adhesive, also suitable for light-coloured or
translucent natural stone types
■ For deformation-sensitive resin-bonded tiles
■ Universal application: thin-bed, floating-bed and medium-bed laying;
filler coats of up to 20 mm thickness 2)
■ Approved as individual product for shipbuilding applications.
■ Low-chromate to Regulation (EC) No 1907/2006, Annex XVII
■ DGNB (German Sustainable Building Council): Top quality level 4, Line 8 3)
■ Recommended by Sentinel Haus Institut
Technical Details Sopro FKM® Silver 600 Extra Rapid Set Tile Adhesive
|Mixing Ratio (water only)||Thin-bed, medium-bed and surface filler consistency: 7.0–7.5 ltr water: 25 kg Sopro FKM 600
Floating-bed consistency: 8.0–8.5 ltr water: 25 kg Sopro FKM 600
|Mixing||Place water in a clean mixing container, add Sopro FKM 600 and mix thoroughly until required workable, lump-free consistency is achieved. After 3–5 minutes maturing time, remix thoroughly.|
|Consistency of mix||Smooth paste|
|Specified times||Apply for normal temperature range of +23°C and 50% relative humidity; higher temperatures shorten and lower temperatures lengthen these times.|
|Coverage||Approx. 1.1 kg/m² per mm coat thickness|
|Maturing Time||3–5 minutes|
|Working Life||20–30 minutes; stiffened mortar shall not be retempered by addition of water or fresh mortar to restore workability.|
|Walkable/Grouting||After approx. 2 hours or after setting of adhesive; take measures to spread loads over floor|
|Loadable||After approx. 5 hours; in commercial facilities after approx. 2 days, in areas subject to high wet exposure after approx. 3 days, for underwater applications after approx. 10 days, in conjunction with wall and floor heating after approx. 14 days.|
|Application Temperature||Between +5°C and +25°C|
|Packaging||25 kg bag, 5 kg bag|
|Tools||Mixing attachment, notched trowel with suitable serration (tooth size up to 12 mm), medium-bed trowel; wash tools with water immediately after use.|
Available in 25kg bags with 40 bags per pallet (and 5kg bags).
1) See TKB (German Technical Committee for Construction Adhesives) data sheet 14 “Rapid-hardening cementitious screeds and cementitious screeds with screed admixtures“ issued on 11 August 2015
by Industrieverband Klebstoffe e.V. (German Adhesives Industry Association).
2) For drylining/dry construction and mastic asphalt screeds, max. 5 mm coat thickness.
3) Based on DGNB (German Sustainable Building Council) criterion “ENV1.2 Local Environmental Impact“ (version 2015).