Clean Wall® DEEP GEL Primer
Clean Wall® DEEP GEL Primer is a water-based special primer without the addition of preservatives for exterior and interior dispersion paints. Special primer with novel gel structure for optimum roller and spray application. For the stabilisation of substrates and for the reduction of absorbency.
Suitable substrates Clean Wall® DEEP GEL Primer
The substrate must be clean, dry and load-bearing. The guidelines of VOB, part C, DIN 18 363, paragraphs 2 and 3 must be observed. Non-adhesive old coats must be completely removed. Ideally applicable for applying on weakly chalking substrates as well as on mechanically abraded substrates. Sanding or highly absorbent substrates require pre-treatment with DEEP GEL.
Application Clean Wall® DEEP GEL Primer
Clean Wall® DEEP GEL can be applied with a roller, brush or airless device. In most cases, a one-time painting is sufficient. Ready to use. Stir gently before use and use undiluted. Processing and drying not at temperatures below + 5 °C. Contact SMET technical for advice.
Technical Details for Clean Wall® DEEP PLUS Primer
|Specific weight||1.02 kg/l|
|Dilution||Ready to use|
|Consumption||Approx. 150 ml/m² depending on substrate.
Exact consumption values for the calculation must be
determined on the object.
|Application||Application Painting, rolling or spraying|
|Airless spraying||Nozzle 0.007-0.009 inch = 0.18-0.23 mm, spraying angle: 50°|
|Drying||Can be recoated after approx. 12 hours at 20 °C and 60 %
relative humidity. In case of cool, humid air, observe
accordingly longer drying times.
|Storage||DEEP GEL should be used within 6 months of
the filling date (see additional piping) when stored cool, frostfree and dry in closed containers.
|Safety instructions||See CASEA safety data sheet
GISCODE: BSW 10 obsolete: M-GF01
EU threshold value for this product (Cat. A/h): 30 g/l (2010).
This product contains < 1 g/l VOC.
Available in 12 l bucket.
CLEAN WALL® – available from SMET, is a groundbreaking product system, unparalleled in the market, aimed at clients who seek holistic solutions for their new-build or refurbishment project. Co-ordinated components cover everything from priming and preparation to Clean Wall® paints – delivering superior-quality stunningly beautiful internal and external wall finishes.